Instructions / Assembly

1 x Slide End Panel 1-1/4 x 37 x 92”
1 x Narrow Back Panel 1-1/4 x 21-1/2 x 92”
1 x Narrow Front Panel 1-1/4 x 21-1/2 x 92”
Wood Parts
040
Step 4: Slide Wall Assembly
A: Place (041) Narrow Back Panel against the left side of (040) Slide End Panel noticing panel orientation. The
tops and bottoms of the panels should be ush and panels square. Pre-drill with a 3/16” drill bit, then fasten
(041) Narrow Back Panel to (040) Slide End Panel with 4 (WL5) 1/4 x 2-1/2” Wafer Lags. (g. 4.1 and 4.2)
B: Place (042) Narrow Front Panel against the right side of (040) Slide End Panel noticing panel orientation.
The tops and bottoms of the panels should be ush and panels square. Pre-drill with a 3/16” drill bit, then fasten
(040) Slide End Panel to (042) Narrow Front Panel with 4 (WL5) 1/4 x 2-1/2” Wafer Lags. (g. 4.1 and 4.3)
Fig. 4.2
042
Fig. 4.1
040
Flush
Hardware
8 x 1/4 x 2-1/2” Wafer Lag
WL5
Flush
041
042
Notice (041) Narrow
Back Panel overlaps
(040) Slide End Panel
Fig. 4.3
040
040
Notice (040) Slide End
Panel overlaps (042)
Narrow Front Panel
041
Flush
WL5
WL5
24 [e-mail]