Instructions / Assembly

Hardware
6 x 5/16 x 2-3/8” Wafer Bolt
 (5/16”atwasher,5/16”t-nut)
2 x Roof Support 1-1/4 x 3 x 72”
Wood Parts
062
Step 6: Join Swing and Slide Wall Assemblies
Part 3
E: From outside the assembly, place 1 (062) Roof Support against (041) Narrow Back Panel and (052) Back
Wall Panel so it sits 3/4” above the panels and has approximately 3-1/16” overhang at each corner then attach
with 3 (WB8) 5/16 x 2-3/8” Wafer Bolts (with at washer and t-nut) . (g. 6.6 and 6.7)
F: Repeat Step E to attach 1 (062) Roof Support to (042) Narrow Front Panel and (051) Front Wall Panel. (g.
6.6 and 6.7)
Inside View
Fig. 6.7
Fig. 6.6
Front Wall
Back Wall
052
041
WB8
3/4”
WB8
062
5/16” Flat
Washer
5/16”
T-Nut
Approx
3-1/16”
28 [e-mail]