Instructions / Assembly

Step 8: Attach Wall Tops
A: In the opening of (050) SW Wall Panel, from the inside, attach (080) SW Wall Top, tight to the corner of the
panels with overhang facing in with 1 (S11) #8 x 2” Wood Screw at each end as shown in g. 8.1 and 8.2.
B: Attach (080) SW Wall Top to slat in (050) SW Wall Panel with 1 Corner Bracket using 3 (S13) #6 x 5/8” Pan
Screws. (g. 8.1 and 8.3)
C: In the opening of (040) Slide End Panel, from the inside, attach (081) Half Wall
Top, tight to the corner of the
panels with overhang facing in with 1 (S11) #8 x 2” W
ood Screw at each end as shown in g. 8.1 and 8.2.
D: Attach (081) Half Wall Top to slats in (040) Slide End Panel with 2 Corner Bracket using 3 (S13) #6 x 5/8”
Pan Screws per bracket. (g. 8.1 and 8.3)
Tight
Hardware
Fig. 8.1
Fig. 8.2
1 x SW Wall Top 5/4 x 3 x 33-1/2”
1 x Half Wall Top 5/4 x 3 x 33”
Wood Parts
080
040
4 x #8 x 2” Wood Screw
9 x #6 x 5/8” Pan Screw
S11
Inside View
S11
081
080
050
x 1 per end
per board
Other Parts
3 x Corner Bracket
S13
081
Fig. 8.3
Inside View
S13
x 3 per
bracket
Corner
Bracket
Slat
Slat
32 [e-mail]