Instructions / Assembly

Step 23: Crowsnest Wall Assembly
A: Tight to each (201) Upright Crowsnest and tight to the oor and gap boards attach 1 (230) Cedar Wall to each
(210) Crowsnest Bottom Side and (212) Crowsnest Side with 4 (S33) #8 x 1” Wood Screws per board. (g. 23.1)
B: Measure 2-1/4” from each (230) Cedar Wall then attach another (230) Cedar Wall per side, tight to the oor
and gap boards using 4 (S33) #8 x 1” Wood Screws per board. (g. 23.1)
Hardware
16 x #8 x 1” Wood Screw
4 x Cedar Wall 1 x 4 x 29”
230
Wood Parts
S33
Bevelled edges
facing out.
Fig. 23.1
2-1/4”
212
212
230
210
210
230
x 4 per
board
S33
201
201
Tight
Tight
65 [e-mail]