Instructions / Assembly

36"
36"
340
Fig. 39.1
Fig. 39.2
340
Parts removed
for clarity
363
x 12
Step 39: Front Roof Assembly
Part 1
Wood Parts
A: On the Front, from inside the assembly, measure 36” from the end of (062) Roof Support. Place (390)
FR Centre Gable on top of (051) Front Wall Panel so the middle is at the 36” mark. Attach to (062) Roof
Support, (370) Mid Gable Support and (340) Roof Rafters with 5 (S20) #8 x 1-3/8” Wood Screws. (g. 39.1
and 39.2)
B: From the outside of the assembly place (362) Starburst Centre on top of (370) Mid Gable support then
attach (390) FR Centre Gable to (362) Starburst Centre with 1 (S20) #8 x 1-3/8” Wood Screw
. (g. 39.1 and
39.2)
C: Place 1 (363) Sunburst Side tight to each side of (390) FR Centre Gable and tight to each (340) Roof
Rafter then attach to (362) Starburst Centre and (340) Roof Rafters with 3 (S20) #8 x 1-3/8” Wood Screws
per board. (g. 39.1 and 39.2)
Hardware
Outside View
Front
Inside View
S20
362
390
363
051
062
1 x FR Centre Gable 1 x 6 x 34-15/16”
1 x Starburst Centre 5/4 x 6 x 12”
2 x Sunburst Side 1 x 5 x 10”
390
12 x #8 x 1-3/8” Wood Screw
S20
362
363
370
87 support@cedarsummitplay.com