Instructions / Assembly
44 support@solowavedesign.com
Step 17: Upper Half Wall Assembly
Part 3
F: From outside of the assembly place 2 (0375) Cafe Sides over the 2 (0315) Chalkwall Supports that surround
the (0390) Cafe Table Top so the edges are ush to each other. Each (0375) Cafe Side should t tight to both
(0377) Cafe Top and (0390) Cafe Table Top. Attach with 3 (S0) #8 x 7/8” Truss Screws per board. (g. 17.8)
G: From outside the assembly place (0373) Chalkwall Side on the remaining (0315) Chalkwall Support so the
inside edges are ush. The top of (0373) should be tight to the bottom of (0377) Cafe Top. Attach with 3 (S0) #8 x
7/8” Truss Screws. (g. 17.8)
H: From the Front and Back sides of the assembly attach each (0369) Corner Trim to (0373) Chalkwall Side and
(0375) Cafe Side with 4 (S26) #8 x 2” Pan Screws per side. (g. 17.9)
Wood Parts Hardware
9 x #8 x 7/8” Truss Screw
8 x #8 x 2” Pan Screw
1 x Chalkwall Side 7/16 x 3 x 21-7/8”
2 x Cafe Side 7/16 x 3 x 21”
0373
0375
x 4 per
side
Fig. 17.8
Outside View
Fig. 17.9
Back Wall
Front Wall
S26
x 3 per board
(hidden)
S0
0315
0369
0369
0373
0373
0377
0375
Tight
Tight
0390
S26
S0