Instructions / Assembly

48 [e-mail]
Note: Install 2 AA Batteries in Doorbell prior to attaching to assembly.
A: On the outside of the assembly attach Doorbell Trim to (0323) Front Right Wall, in the hole provided with 2
(S13) #6 x 5/8” Pan Screws, as shown in g. 20.1 and 20.2.
B: From inside the assembly attach Doorbell to (0323) Front Right Wall with 2 (S10) #8 x 1” Pan Screws. (g.
20.1 and 20.3)
Step 20: Attach Door Bell Assembly
0323
Fig. 20.1
Doorbell
Fig. 20.2
Fig. 20.3
S10
Inside View
Doorbell Trim
S13
Hardware Other Parts
1 x Doorbell
1 x Doorbell Trim
2 x #8 x 1” Pan Screw
2 x #6 x 5/8” Pan Screw
S10
S13
Note: Use only AA batteries (1.5 Volt)
Do not mix old and new batteries
Do not mix alkaline, standard (carbonized)
or rechargeable (nickel-cadmium batteries)