Specifications

Model 7477-02
SPECIFICATIONS FOR KIDSTUFF PLAYSYSTEMS COMPONENTS
Ages 5-12 Playsystem, 3 1/2" OD Posts, Steel Decks
POSTS: 3-1/2" OD galvanized high-strength steel tubing 13 gauge; yield strength:
45,000 psi (min); tensile strength: 48,000 psi (min). Posts are cut to length before
powder-coating. Posts meet or exceed all applicable ASTM standards. Some
applications require 11 ga. or 8 ga. posts—these are noted in specifications. 5” OD
posts as above, but 11 ga. rather than 13 ga.
HEX DECKS: Fabricated of 12 ga. punched steel, reinforced with 10 ga. ribs 2 1/2”
high. Corners are reinforced with 8 ga. steel. Deck edges are “rolled” on the bottom
for added strength and safety. Unit is “plastisol”-dipped after fabrication. Deck
mounts to posts 46 1/4” o.c. with aluminum clamps or one-piece aluminum collars.
Hex decks measure 83 1/4” across, 93 1/2” “corner-to-corner;” approx. 40 sq. ft.
ROOF: (for steel decks, CNC plastic) Matches Hex deck roof of same style.
Constructed of multi-colored, computer-cut gable ends and sheets of shingle-
patterned ¾” and ½” UV-stabilized HDPE. Bolts to aluminum brackets 1/4“ thick
which slide over posts tops for ease of adjustment . Secured with stainless steel
fasteners.
TRANSFER MODULE: Fabricated of 12 ga. punched steel, dipped in “plastisol”
after fabrication. Step size and height comply with ASTM guidelines for transferring
from a wheelchair to a playstructure.
LOOP OVERHEAD LADDER: Top beam is 10 ga., 2.38" OD tubing; loops are
formed from 1.16" OD tubing and fillet-welded to top beam. Curved O/H Loop
Ladder has 1.90” OD x 10 ga. intermediate support leg. Attaches at each end to 3
1/2" posts whether used as a connecting or freestanding event, or with one end to
playstructure. Ladder is 119" long.
CHINNING OR TURNING BAR: 1.162" OD tubing, 14 ga. For applications for
children aged 2-12 and 5-12 Chin Bar is 1.31” OD tubing. Height at direction of
customer or 84” maximum.
POST CAP FOR 3-1/2" OD POST: Shatter-proof caps are injection-molded of
polypropylene. Unique "one-way" design provides a tight fit while preventing removal.
CRUNCH BAR: One-piece C-shaped crunch bar of 1.16” OD tubing, 17 ga.,
attaches to post with aluminum clamps. Geometry assures that unit cannot pull
free. May be set at any height (Guideline maximum is 84”.)
Page 2 of 4