Specifications

Model 7368-02
SPECIFICATIONS FOR KIDSTUFF PLAYSYSTEMS COMPONENTS
Ages 5-12 Playsystem, 3 1/2" OD Posts, Steel Decks
CRAWL TUNNEL: All plastic components of rotationally-molded, UV-stabilized
HDPE plastic (nom. wall thickness of 1/4"). Two or more straight or curved 24”
flanged tubes are connected together to form tunnel. When accessed from play
structures each end of tunnel is typically connected to and supported by a double-
walled, rotationally-molded, UV-stabilized HDPE plastic panel (nom. nominal wall
thickness of 1/4"). In most applications in which tunnels are free-standing on one or
both ends, flanges are extended for additional rigidity and these end panels are not
used. Free end of tunnel is supported with 1.31” OD “saddle” welded to 1.90” OD
tubing legs.
PIPE WALL: Constructed with a 14 ga. 1.16" OD tubing frame with bars of 1.16"
OD tubing, 17 ga. Height is sized for ages 2-5 or 2-12.
TIC TAC TOE: Cylinders are rotationally-molded, UV-stabilized, HDPE with molded-
in graphics. Pipe frame is 1.16” OD tubing, powder-coated after fabrication. Steel
deck systems and platforms above 48” have blocks framed by a 3/4” HDPE
computer-generated panel. Two graphics options are available: X's and 0’s or a
pair of colorful cartoon dinosaurs. May be used on or under decks, or as a free-
standing play event
SNAKE CLIMBER: Loops fabricated of 1.31" OD galvanized steel tubing bent and
welded to a 1.90” OD “J”-frame stem form a snake-like design. Loops stop at deck
height. One-piece welded unit attaches to center of deck opening. 10 ga. Bracket
attached under deck stabilizes assembly.
TRI-RIDE SLIDE: Slide is a one-piece, triple bedway slide, 128" long, designed for
a 72" high deck. It has double walls of rotation-molded, UV-stabilized HDPE, each
wall approx. 1/4" thick. Each of the 3 bedways provides a different ride: straight and
smooth, wavy, or rippled.
CLIMBING WALL: Computer-generated UV-stabilized HDPE plastic panel, 3/4"
thick, with hand grips as well as holes for gripping and foott placement. Designed to
work with decks from 54" to 72" high.
PLASTIC SLIDES: All plastic slides are double-walled, rotationally-molded with a
nominal wall thickness of 1/4", manufactured with UV-stabilized HDPE. Color is
stabilized by ultraviolet inhibitors.
CRUNCH BAR: One-piece C-shaped crunch bar of 1.16” OD tubing, 17 ga.,
attaches to post with aluminum clamps. Geometry assures that unit cannot pull
free. May be set at any height (Guideline maximum is 84”.)
Page 4 of 5