Instruction Manual

ManualsBrandsKIDZTECH TOYS MANUFACTURING ManualsAutomotive1/26 RC Big Foot Off-Road Truck

Transmitter

Forward /

Backward

Transmitter

Antenna

LED Battery

Indicator

Left /

Right

OFF / ON

Transmitter -

Battery Installation

Direction

Adjustment

Battery

Compartment

ON / OFF Switch

4.8V Ni-MH

500mAh

For Vehicle

(Included)

1 x 9V

For Transmitter

(Included)

85025/85026

Contents

RC Vehicle (Vehicle) x 1

RC Transmitter (Transmitter) x 1

Antenna for RC Transmitter x 1

Instruction Manual x 1

Battery Requirement

1. Vehicle: 4.8V Ni-MH 500mAh

2. Transmitter: 1 x 9V battery

Battery Precaution

1. Alkaline batteries are recommended to be used

2. Only batteries of the same or equivalent type as recommended are to be used

3. Do not mix alkaline, standard or rechargeable batteries

4. Do not mix old and new batteries or different type of batteries

5. Non-rechargeable batteries are not to be charged

6. If rechargeable batteries are to be used, they are only to be charged under adult supervision

7. Rechargeable batteries are to be removed from the product before they are charged

8. Be sure to insert batteries with correct polarities and always follow the battery manufacturer’s instructions

9. Remove all batteries from the Vehicle and Transmitter when not in use

10. Exhausted batteries are to be removed from the product

11. The supply terminals are not to be short-circuited

12. Dispose of batteries properly. Do not dispose the batteries in fire - it may cause them to explode or leak causing injury or damage

13. Battery installation and removal must only be done by adult

Battery and Antenna Installation

For Vehicle (Fig. 1 and Fig. 2)

1. Switch OFF the power

2. Unscrew the screw and lock on the battery cover

3. Push the battery cover downward

4. Open the battery cover

5. Install 4.8V Ni-MH batteries with correct polarities (+/-)

as shown inside the battery compartment

6. Close the battery cover

7. Push the battery cover upward to lock it

8. Tighten the screwn and lock on the battery cover

Vehicle

Vehicle - Battery Installation

Vehicle - Battery Cover

For Transmitter (Fig. 3 and Fig. 4)

1. Switch OFF the power

2. Unscrew the screw on the battery cover

3. Open the battery cover

4. Install 1 new 9V battery with correct polarities (+/-)

as shown inside the battery compartment

5. Close the battery cover

6. Tighten the screw on the battery cover

7. Insert the antenna into the top of Transmitter, tighten it by rotating

clockwise (viewing from top of Transmitter)

4.8V

Direction

Adjustment

ON / OFF Switch

Direction

Adjustment

ON / OFF Switch

age

Summary of content (2 pages)

PAGE 1
6 age 85025/85026 Contents RC Vehicle (Vehicle) x 1 RC Transmitter (Transmitter) x 1 Antenna for RC Transmitter x 1 Instruction Manual x 1 Battery Requirement 4.8V Ni-MH 1. Vehicle: 4.8V Ni-MH 500mAh 2. Transmitter: 1 x 9V battery 4.8V 1 x 9V 500mAh For Vehicle (Included) For Transmitter (Included) Battery Precaution 1. Alkaline batteries are recommended to be used 2. Only batteries of the same or equivalent type as recommended are to be used 3.
PAGE 2
How to Play 1. 2. 3. 4. 5. 6. 7. Switch ON the Vehicle. Use the Forward / Backward joystick (Fig.3) to drive the Vehicle forward and backward. Use the Left / Right joystick (Fig.3) to control the Vehicle turning left or right. If the vehicle does not run in straight line, adjust the direction adjustment on the vehicle chassis (Fig. 1). Play on smooth surface to have the optimum performance. Remember to switch OFF the power of the Vehicle and Transmitter after playing.