Instruction Manual

87415
The packaging and instruction manual contain important information. Please keep them
for future reference.
We reserve the right to improve/amend specifications and colors without notice.
3. Press the right button of the transmitter for light, sound and smoking effect
4. Play on a smooth surface for optimal performance
5. Remember to switch OFF the power of the T-Rex after
playing
6. The optimal control range is up to 15M / 49FT
1. Plug the T-Rex tail in the body. Switch ON the T-Rex
2. Press the left button of the transmitter to control
the T-Rex moving forward
FCC Label Compliance Statement:
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interfer-
ence to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna
- Increase the separation between the equipment and receiver
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
- Consult the dealer or an experienced radio/TV technician for help
Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
RSS-210 Compliance Statement:
This device complies with Industry Canada Licence-exempt RSS-210. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this
device must accept any interference, including interference that may cause undesired operation of the device.
Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry
Canada,. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more
than that necessary for successful communication.
Declaration of Conformity
The product is in conformity with the requirement of EU Directive 2014/53/EU.
Environmental Notes:
The whole product also does not belong to household waste at the end of the product life.
You can return it at collection points for the recycling of electronic and electronical instruments
The symbol on the item, instruction manual, hangtag or packing is showing this clearly.
Materials should be recycled according to their respective markings.
Recycling of old devices or other re-use of materials contained therein represents an important
contribution to environmental protection.
Please ask at your local community for the correct collection point.
Disposal of Batteries
Batteries should not be disposed of in the household waste. As the consumer you are legally obliged to return
batteries containing harmful substances and all other used batteries. You can hand in your old batteries
at public collection points in your area or wherever batteries are sold.
You will find these chemical abbreviations along with a crossed-out refuse bin on batteries containing
harmful substances:
Pb=Battery contains lead
Cd=Battery contains cadmium
Hg=Battery contains mercury
Performance Tips
1. Do not operate T-Rex on grass, dirt, sand, dusts, carpet or go through water.
2. Do not operate T-Rex in windy or rainy weather.
3. Avoid direct impact with obstacles.
4. Switch OFF the power when not in use to prevent damage of T-Rex due to leakage of
electrolyte from batteries.
5. Remove all batteries from the T-Rex and Transmitter when not in use for long period.
6. Keep fingers, hair and loose clothing away from wheels.
7. The operating range can be affected by a variety of factors
a) Low Voltage of batteries in Transmitter or T-Rex
b) Interference from other items that emit radio frequency signals.
8. Outdoor usage is recommended in order to get optimal control range.
9. Play with the T-Rex on a clean and smooth surface.
10. Clean the battery compartment to make sure it is free from dust to prevent poor
contact of batteries
Cautions
1. Do not attempt to disassemble the T-Rex or Transmitter
2. Make sure the batteries are installed with correct polarities (+/-) as shown inside the
battery compartment
3. Remove the package and take out all accessories before giving the T-Rex and
Transmitter to child to play
1. Switch OFF the T-Rex and Switch ON to re-start.
2. Re-install batteries to the transmitter.
3. The transmitter signal light will flash for 7-8 seconds.
4. After the LED light of the transmitter stops flashing, the pairing process is complete for playing.
5. If pairing cannot be completed within 8 seconds, please turn off the T-Rex and re-start the pairing process.
6. When the pairing process is done, whenever switching the T-Rex on and off, it searches for the code that is memorized and will only lock on to the
transmitter signal contained that code.
7. If the pairing signal disconnected, please turn off the T-Rex and re-install the batteries in the transmitter. The pairing process will be completed after
turning on the T-Rex again.
Trouble shooting for 2.4GHz pairing in case of no signal
How to play
T-Rex
Light, Sound &
Smoking Effect
Light, Sound
& Smoking
Effect
Frequency band: 2408-2475 MHz
Maximum radio frequency
power transmitted: <0dBm
Conforms to the safety requirements of ASTM F963
Move Forward
Move
Forward
KIDZTECH TOYS MANUFACTURING LTD.
Room 802, 8/F, Inter-Continental Plaza,
94 Granville Road, TST East, Hong Kong.
Tel: [phone] [e-mail]
Made in China http://www.kidztech.net
KT-RM-01/11/2019-EN
US OFFICE:
1540 Forest Avenue,
River Forest, IL 60305, USA
Tel: [phone] Fax: [phone]
ON/OFF
& Try Me