SDS

US. OSHA Table Z-3 (29 CFR 1910.1000)
Form
ValueComponents Type
TWA 0.1 mg/m3 Respirable.Quartz (SiO2) (CAS
14808-60-7)
2.4 mppcf Respirable.
TWA 5 mg/m3 Respirable fraction.Titanium dioxide (CAS
13463-67-7)
15 mg/m3 Total dust.
50 mppcf Total dust.
15 mppcf Respirable fraction.
US. ACGIH Threshold Limit Values
Form
ValueComponents Type
TWA 0.025 mg/m3 Respirable fraction.Quartz (SiO2) (CAS
14808-60-7)
TWA 10 mg/m3Titanium dioxide (CAS
13463-67-7)
US. NIOSH: Pocket Guide to Chemical Hazards
Form
ValueComponents Type
TWA 5 mg/m3 Respirable.Limestone (CAS 1317-65-3)
10 mg/m3 Total
TWA 0.05 mg/m3 Respirable dust.Quartz (SiO2) (CAS
14808-60-7)
No biological exposure limits noted for the ingredient(s).
Biological limit values
Good general ventilation should be used. Ventilation rates should be matched to conditions. If
applicable, use process enclosures, local exhaust ventilation, or other engineering controls to
maintain airborne levels below recommended exposure limits. If exposure limits have not been
established, maintain airborne levels to an acceptable level.
Appropriate engineering
controls
Individual protection measures, such as personal protective equipment
Wear safety glasses with side shields (or goggles).
Eye/face protection
Skin protection
Wear appropriate chemical resistant gloves.
Hand protection
Skin protection
Wear appropriate chemical resistant clothing.
Other
If airborne concentrations are above the applicable exposure limits, use NIOSH approved
respiratory protection. Use a positive-pressure air-supplied respirator if there is any potential for an
uncontrolled release, exposure levels are not known, or any other circumstances where
air-purifying respirators may not provide adequate protection.
Respiratory protection
Wear appropriate thermal protective clothing, when necessary.
Thermal hazards
Always observe good personal hygiene measures, such as washing after handling the material
and before eating, drinking, and/or smoking. Routinely wash work clothing and protective
equipment to remove contaminants.
General hygiene
considerations
9. Physical and chemical properties
Appearance
Liquid.
Physical state
Liquid.
Form
White.
Color
Slight.
Odor
Odor threshold
Not available.
pH
7 - 10
Melting point/freezing point
Not available.
KILZ® 2 All-Purpose Interior/Exterior Primer SDS US
953718 Version #: 01 Revision date: - Issue date: 26-May-2020
3 / 7