TDS
Revised 6/2014
TECHNICAL DATA SHEET
This information is provided “as is” and no representations or warranties, either expressed or implied, of merchantability, tness for a particular purpose or of any other
nature are made with respect to this information or to any product referred to in this information. For SDS or to consult with a technical service representative, call
1-877-KILZ-PRO. ©2019 Masterchem Industries LLC, 3135 Old Hwy M, Imperial, MO 63052-2834.
Revised 03/2019
1 of 2
MULTI-SURFACE SEALER & STAINBLOCKER
NO. 2000
PRODUCT INFORMATION
KILZ 2® ALL-PURPOSE Primer is a fast drying, water-based, multi-surface primer-sealer-stainblocker with excellent adhesion,
mildew resistance, sealing properties and very mild odor. KILZ 2 ALL-PURPOSE Primer blocks medium stains including minor
water stains, rust, grease, ink, pencil and felt marker. Enhanced hiding makes it ideal for changing colors and helps lessen the
number of coats of paint required. Use under or over water-based or oil-based paints. Not recommended on ooring.
RECOMMENDED USES:
Use on properly prepared interior and exterior surfaces, such as:
• Wood • Stucco • Paneling
• Drywall • Brick • Painted Metal
• Plaster • Masonry • Galvanized Metal
PRODUCT SPECIFICATIONS:
Tint Bases/Max Tint Load:
No. 2000 128 oz / 2 oz
Sheen: < 10.0 @ 85°
Sheen levels depend on porsosity and various surface
irregularities.
Resin Type: Acrylic Polymer
Weight per Gallon: 11.0 lbs
% Solids by Volume: 33%
% Solids by Weight: 48.5%
VOC: < 50 g/L
Flash Point: N/A
Viscosity: 95 - 105 KU
Recommended Film Thickness:
Wet: 5.3 mils / Dry: 1.7 mils @ 300 Sq. Ft./Gal.
Wet: 4.0 mils / Dry: 1.3 mils @ 400 Sq. Ft./Gal.
Coverage: 300 - 400 Sq. Ft./Gal. depending on the surface
texture, porosity and application method. Does not include
the loss of material from spraying.
APPLICATION:
Brush: Nylon / Polyester
Roller: 3/8” - 3/4” nap
Airless Spray: Fluid pressure of 1,800 - 3,000 psi
Tip: .015” - .021”
Filter: 60 mesh
Thinning: Not recommended. Product is formulated for use
at package consistency only.
Dry Time: @ 77°F, 50% RH
Longer dry time required in cooler temperatures and in
higher humidity.
To Touch: 30 Minutes
To Recoat: 1 hour
SURFACE PREPARATION:
The surface must be clean, free of dust, grease, wax, peeling
paint, mold, mildew and wallpaper paste. If washing is
necessary, use a non-soapy detergent or a TSP substitute.
Rinse well and allow to dry.
Peeling or Checked Paint: Scrape o loose paint and sand
to a smooth surface. Sanding or removal of paint containing
lead is hazardous.
*
Unpainted, exterior wood: Exposed to sun and/or
moisture longer than 2-4 weeks must be cleaned and
sanded before priming.
*
Glossy Surfaces: For maximum adhesion, scu sand the
surface thoroughly before priming.
Masonry, Brick, Stucco and Plaster: KILZ 2 ALL-PURPOSE
Interior & Exterior Water-Base Primer may be used on clean,
dry, aged masonry surfaces. New masonry must be allowed
to cure (dry) at least 30 days before applying
KILZ 2 ALL-PURPOSE Primer.
Fire Restoration: It is critical to clean smoke damaged
surfaces thoroughly before priming. Primer recommendations:
Water based primers such as KILZ RESTORATION™ or oil
based primers such as KILZ® ORIGINAL (interior use) or
KILZ ORIGINAL INTERIOR/EXTERIOR.
*
WARNING! If you scrape, sand or remove old paint, you
may release lead dust. LEAD IS TOXIC. Contact the National
Lead Information Center at 1-800-424-LEAD or log on to
www.epa.gov/lead.
TEST SPECIFICATIONS:
Flexibility
ASTM D522 - Pass
Biological Growth
ASTM D3274 - Pass
CLEAN UP:
Clean all tools and equipment with clean water. For disposal
of empty containers and unused product, contact your
household refuse collection service.
CAUTIONS/LIMITATIONS:
• Protect from freezing.
• For best results, apply at temperatures between
50°F - 90°F. Temperatures above 90°F may aect the
application such as drying too fast. Avoid painting in
direct sun.
• Shelf life under normal conditions is 2 years unopened.
• Partially used cans might develop skinning if not
tightly sealed.
GENERAL INFORMATION:
CAUTION IRRITANT Avoid contact with eyes. May cause
eye, nose and throat irritation. Avoid breathing of dust,
vapors or spray mist. Open windows and doors or use
other means to ensure fresh air entry during application
and drying. If you experience eye watering, headache or
dizziness or if air monitoring demonstrates vapor/ mist
levels are above applicable limits, wear an appropriate,
properly tted respirator (NIOSH / MSHA TC -23C or
equivalent) during and after application. Follow respirator
manufacturer’s directions for respirator use. Close container
after each use. Wash thoroughly after handling and before
smoking or eating.
FIRST AID: If swallowed, do not induce vomiting.
Get medical attention immediately. If you experience
diculty in breathing, leave the area to obtain fresh
air. If continued diculty is experienced, get medical
COMPLIES WITH THE BELOW AS OF 1/1/2019
SCAQMD YES LEED
†
YES
CARB YES MPI# 6
OTC YES GREENGUARD YES
LADCO YES CHPS YES
AIM YES NAHB/ICC NGBS YES
†
Please see www.usgbc.org/LEED for additional details.
WARNING
Cancer and Reproductive Harm– www.P65Warnings.ca.gov