TDS

TECHNICAL DATA SHEET
This information is provided “as is” and no representations or warranties, either expressed or implied, of merchantability, tness for a particular purpose or of any other
nature are made with respect to this information or to any product referred to in this information. For SDS or to consult with a technical service representative, call
1-877-KILZ-PRO. ©2019 Masterchem Industries LLC, 3135 Old Hwy M, Imperial, MO 63052-2834.
Revised 03/2019
1 of 1
KILZ® UPSHOT® INTERIOR OVERHEAD STAIN SEALER
NO. 10007
PRODUCT INFORMATION
KILZ® Upshot® is a unique interior stain sealer that has a vertical spray tip for easy ceiling application. It blocks most ceiling stains such
as water, smoke, grease and more. KILZ Upshot dries fast and is tinted to match most aged and acoustical ceilings.
RECOMMENDED USES:
Use on properly prepared interior surfaces, such as:
• Ceilings • Mineral Fiber Ceilings • Wood
• Ceiling Tiles • Drywall • Paneling
• Gypsum Wallboard Ceilings • Plaster • Masonry
PRODUCT SPECIFICATIONS:
FILL
No. 10007
Aerosol – 10 oz
FINISH
85° = < 10.0
Sheen levels depend on porosity and various surface
irregularities.
COMPOSITION
Vehicle: Modied Alkyd
Weight Solids: 40.0% (+/-) 2%
Volume Solids: 18.0% (+/-) 2%
Max VOC (by weight): 60%
Max Product Weighted MIR: 0.70
Flash Point: -156°F (-104°C)
Coverage: 14 - 19 sq. ft. (1.3 - 1.7 m2) per gallon,
depending on the surface texture, porosity and application
method. Does not include the loss of material from spraying.
APPLICATION:
• Eye protection is recommended.
• For best results, use at room temperature.
• Cover adjacent areas to protect from overspray.
• Shake can vigorously for 1 minute after mixing ball begins
to rattle and often during use.
• Hold can upright, moving from side-to-side while spraying
lightly and evenly about 12” from area being painted.
• 2-3 thin coats produce best results.
• Topcoat with latex or oil-based paint.
• NOTE: On some surfaces, spot priming may cause a
non-uniform appearance in the nal.
Dry Time: @ 77°F (25°C), 50% RH
Longer dry time may be required in cooler temperatures and
in higher humidity.
To Touch: 15-30 minutes
To Recoat: 1 Hour
SURFACE PREPARATION:
The surface must be clean, free of dust, grease, wax, peeling
paint, mold, mildew and wallpaper paste. If washing is
necessary, use a non-soapy detergent or a TSP substitute.
Rinse well and allow to dry.
Peeling or Checked Paint: Scrape o loose paint and
sand to a smooth surface. Sanding or removal of paint
containing lead is hazardous.
*
†
Glossy Surfaces: For maximum adhesion, scu sand the
surface thoroughly before priming.
CLEAN UP:
• Clear spray valve immediate after use by turning can
upside down and spraying until only clear gas is released.
• If spray nozzle becomes clogged, remove and clean. Do not
stick pins or wire into can opening.
• Replace nozzle with valve opening pointed away from you.
• Clean fresh overspray with mineral spirits or paint thinner.
Remove dried paint with paint remover, but test small area
rst to ensure paint remover does not damage substrate.
• Please consider donating any unused product.
• For recycling or disposal information, contact your local
household refuse collection service.
CAUTIONS/LIMITATIONS:
LIFETIME LIMITED WARRANTY: Masterchem Industries
LLC warrants to you, the original residential consumer
purchaser, the performance of this product as described
on this label for so long as you reside in your home. If this
product is found to be defective upon inspection by its
representative, Masterchem Industries LLC will, at its option
and upon presentation of proof-of-purchase (the original
receipt), either furnish an equivalent amount of new product
or refund the original purchase price of this product to you.
This warranty is not transferable. This warranty excludes
(1) labor and costs of labor for the application or
removal of any product, and (2) any incidental or
consequential damages, whether based on breach
of express or implied warranty, negligence, strict
liability or any other legal theory. Some states
do not allow the exclusion or limitation of incidental
or consequential damages, so the above limitation or
exclusion may not apply to you. To the extent permitted by
applicable law, any implied warranties including the implied
warranties of merchantability and of tness for a particular
purpose, are limited to the duration of this express warranty.
Some states do not allow limitations on how long an implied
warranty lasts, so the above limitation may not apply to you.
This warranty gives you specic legal rights and you may
also have other rights, which vary from state to state. Note
to residents of the State of New Jersey: The provisions of this
warranty, including its limitations, are intended to apply to
the fullest extent permitted by the laws of the State of New
Jersey. For warranty service, call: 1-866-774-6371, or email:
[e-mail]. Masterchem Industries LLC
reserves the right to inspect any and all application of the
product prior to processing your claim made under
this warranty.
COMPLIES WITH THE BELOW AS OF 1/1/2019
SCAQMD YES MPI # NO
CARB YES MPI X-GREEN NO
OTC YES GREENGUARD® NO
LADCO YES GREEN SEAL™ NO
AIM YES CHPS NO
LEED® NO NAHB / ICC NGBS NO
†
Please visit www.usgbc.org/LEED for additional details.