TDS

Revised 6/2014
TECHNICAL DATA SHEET
This information is provided “as is” and no representations or warranties, either expressed or implied, of merchantability, tness for a particular purpose or of any other
nature are made with respect to this information or to any product referred to in this information. For MSDS or to consult with a technical service representative, call
1-877-KILZ-PRO. ©2018 Masterchem Industries, 3135 Old Hwy M, Imperial, MO 63052-2834.
1 of 2
INTERIOR / EXTERIOR OIL-BASE PRIMER
NO. 1008 / 1009
PRODUCT INFORMATION
KILZ ORIGINAL INTERIOR/EXTERIOR Primer is an oil-based primer, sealer and stainblocker ideal for heavy stain blocking,
sealing multiple interior and exterior surfaces and preparing it for painting. It is especially eective at blocking grati,
tannin, water, smoke and other bleeding stains. KILZ ORIGINAL INTERIOR/EXTERIOR Primer has excellent adhesion and
penetration to bare wood. It also dries quickly and provides a mildew resistant coating. It can be used under water-based or
oil-based paint. Not recommended on ooring.
RECOMMENDED USES:
Use on properly prepared interior and exterior surfaces, such as:
• Brick • Drywall • Masonry
• Painted Metal • Plaster • Properly Prepared Glossy Surfaces
• Siding • Stucco • Wood
PRODUCT SPECIFICATIONS:
Tint Bases/Max Tint Load:
No. 1009 (350 VOC)
Gallon – 128oz / 2oz
**
5 Gallon – 640oz / 10oz
**
No. 1008 (450 VOC)
Gallon – 128oz / 2oz
**
5 Gallon – 640oz / 10oz
**
**
Tinting is not recommended for stainblocking applications
Sheen: < 10.0 @ 85°
Sheen levels depend on porosity and various surface
irregularities.
No. 1009 (350 VOC)
Resin Type: Alkyd
Weight per Gallon: 11.3 lbs.
% Solids by Volume: 57%
% Solids by Weight: 75%
Flash Point: 74°F
Viscosity: 80-90 KU
No.1008 (450 VOC)
Resin Type: Alkyd
Weight per Gallon: 10.3 lbs
% Solids by Volume: 42%
% Solids by Weight: 64%
Flash Point: 71°F
Viscosity: 85 - 95 KU
Recommended Film Thickness:
Wet: 5.3 mils / Dry: 3.0 mils @ 300 Sq. Ft./Gal.
Wet: 4.0 mils / Dry: 2.2 mils @ 400 Sq. Ft./Gal.
Coverage: 300 - 400 Sq. Ft./Gal. depending on the surface
texture, porosity and application method. Does not include
the loss of material from spraying.
APPLICATION:
Brush: Nylon / Polyester Blend
Roller: 3/8” - 1/2” nap
Airless Spray: Fluid pressure of 2,500 - 3,200 psi
Tip: .015” - .021”
Filter: 60 mesh
Thinning: Not recommended. Product is formulated for use
at package consistency only.
Dry Time: @ 77°F (25°C), 50% RH
Longer dry time required in cooler temperatures and in
higher humidity.
450 VOC
To Touch: 30 Minutes
To Recoat: 1 Hour
350 VOC
To Touch: 90 Minutes
To Paint: 2 Hours
SURFACE PREPARATION:
The surface must be clean, free of dust, grease, wax, peeling
paint, mold, mildew and wallpaper paste. If washing is
necessary, use a non-soapy detergent or a TSP substitute.
Rinse well and allow to dry.
Peeling or Checked Paint: Scrape o loose paint and sand
to a smooth surface. Sanding or removal of paint containing
lead is hazardous.
†
Unpainted, Exterior Wood: If exposed to sun and/or
moisture longer than 2 - 4 weeks must be cleaned and
sanded before priming.
†
Glossy Surfaces: For maximum adhesion, scu sand the
surface thoroughly before priming.
†
Masonry, Brick, Stucco and Plaster: KILZ ORIGINAL
INTERIOR/EXTERIOR Oil-Base Primer may be used on clean, dry,
aged masonry surfaces that have cured (dried) at least 90 days. If
masonry has been cured less than 90 days, use a product such as
KILZ PREMIUM Interior/Exterior Water-Base Primer.
Fire Restoration: It is critical to clean smoke damaged
surfaces thoroughly before priming.
†
WARNING! If you scrape, sand or remove old paint,
you may release lead dust. LEAD IS TOXIC. Contact the
National Lead Information Center at 1-800-424-LEAD or
log on to www.epa.gov/lead.
TEST SPECIFICATIONS:
Flexibility
ASTM D522 - Pass
Adhesion Cured Enamels
ASTM D3359, >4B
Biological Growth
ASTM D3274 - Pass
CLEAN UP:
Clean all tools and equipment with mineral spirits. For
disposal of empty containers and unused product, contact
your household refuse collection service.
CAUTIONS/LIMITATIONS:
• IMPORTANT! Do not open can without reading instructions.
• Do not use when air and surface temperatures are below
50°F or above 90°F.
• Shelf life under normal conditions is two years unopened.
• WARNING: This product contains chemicals known to the
State of California to cause cancer and birth defects, or
other reproductive harm.
• KEEP OUT OF REACH OF CHILDREN
• DO NOT TAKE INTERNALLY
Revised 01/2019
AS OF 6/1/2011 COMPLIES OR IS CERTIFIED WITH:
SCAQMD NO MPI # 136
CARB NO MPI X-GREEN NO
OTC NO GREENGUARD NO
LADCO NO GREEN SEAL
TM
NO
AIM NO CHPS NO
LEED® NO NAHB/ICC NGBS NO