SDS

Supplemental information
None.
3. Composition/information on ingredients
Mixtures
67-64-1 10 - 30Acetone
CAS number %Chemical name
64742-47-8 10 - 30Distillates (petroleum),
hydrotreated light
64742-49-0 7 - 13Naphtha (petroleum),
hydrotreated light
13463-67-7 7 - 13Titanium dioxide
1317-65-3 5 - 10Limestone
14807-96-6 5 - 10Talc
22464-99-9 0.1 - 12-ethylhexanoic Acid,
Zirconium Salt
123-26-2 0.1 - 1Octadecanamide,
N,N'-1,2-ethanediylbis[12-hydr
oxy-
All concentrations are in percent by weight unless ingredient is a gas. Gas concentrations are in
percent by volume.
The manufacturer has claimed the exact percentage as trade secret under the OSHA Hazard
Communication Standard.
Composition comments
4. First-aid measures
Remove victim to fresh air and keep at rest in a position comfortable for breathing. Call a poison
center or doctor/physician if you feel unwell.
Inhalation
Remove contaminated clothing immediately and wash skin with soap and water. In case of
eczema or other skin disorders: Seek medical attention and take along these instructions. Wash
contaminated clothing before reuse.
Skin contact
Immediately flush eyes with plenty of water for at least 15 minutes. Remove contact lenses, if
present and easy to do. Continue rinsing. Get medical attention if irritation develops and persists.
Eye contact
Not likely, due to the form of the product. In the unlikely event of swallowing contact a physician or
poison control center. Rinse mouth. Do not induce vomiting without advice from poison control
center. If vomiting occurs, keep head low so that stomach content doesn't get into the lungs.
Ingestion
May cause drowsiness and dizziness. Headache. Nausea, vomiting. Severe eye irritation.
Symptoms may include stinging, tearing, redness, swelling, and blurred vision. Skin irritation. May
cause redness and pain. May cause an allergic skin reaction. Dermatitis. Rash.
Most important
symptoms/effects, acute and
delayed
Provide general supportive measures and treat symptomatically. Keep victim under observation.
Symptoms may be delayed.
Indication of immediate
medical attention and special
treatment needed
IF exposed or concerned: Get medical advice/attention. If you feel unwell, seek medical advice
(show the label where possible). Ensure that medical personnel are aware of the material(s)
involved, and take precautions to protect themselves. Show this safety data sheet to the doctor in
attendance. Wash contaminated clothing before reuse.
General information
5. Fire-fighting measures
Water fog. Foam. Dry chemical powder. Carbon dioxide (CO2).
Suitable extinguishing media
Do not use water jet as an extinguisher, as this will spread the fire.
Unsuitable extinguishing
media
Contents under pressure. Pressurized container may explode when exposed to heat or flame.
During fire, gases hazardous to health may be formed.
Specific hazards arising from
the chemical
Firefighters must use standard protective equipment including flame retardant coat, helmet with
face shield, gloves, rubber boots, and in enclosed spaces, SCBA.
Special protective equipment
and precautions for firefighters
KILZ® Mold & Mildew Interior/Exterior Primer - Aerosol SDS US
Version #: 0.1
Revision date: 21-August-2020 Issue date: 21-August-2020
2 / 10