User Manual

4
Canon ACK-E18
1.Open the camera battery cover,Find the right direction to Insert DR-E18 DC
coupler.
2.Pass the dummy battery cable through the slot on the side of the camera
battery compartment
3.make sure close battery cove compartment cover.
4.Connect to the power adapter,turn on the adapter to power your camera
Canon ACK-E12/ACK-E17
1.Open the camera battery cover,Find the right direction to Insert
DR-E12/DR-E17 DC coupler.
2.Make sure close battery compartment cover and open the plughole cover
on the top of the battery compartment .
3.As shown in Figure 2,plug in the DC Coulper plug firmly.
4.Connect to the power adapter,turn on the adapter to power your camera
Kimaru
a total of 10 pages