Specification Sheet

HAND TOWEL Dispensers
NOTE: Unless otherwise noted, suggested mounting height is
the distance from the oor to the bottom of the dispenser.
MOD* TOUCHLESS HARD ROLL TOWEL RECESSED
DISPENSER HOUSING, STAINLESS STEEL
Dispenser Housing is made from a 22 gauge brushed stainless steel. This MOD* Housing, when
combined with one of our innovative internal dispensing modules (ordered separately), gives you the
plug and play flexibility to build a complete customized stainless steel dispenser solution to meet your
requirements. All three versions of our dispensing modules (M-Module, E-Module and NG-Module) will
work in this housing. The housing and its respective module will dispense one 8” diameter roll of 700’
or 1150’ product plus stub roll utilizing core plug mounting.
Suggested mounting height 48” maximum from bottom of housing.
Rough Wall Opening:
11
1
⁄
8
” Wide
15
3
⁄
8
” High
4” Min. Depth
31501