Specification Sheet

35370
HAND TOWEL Dispensers
NOTE: Unless otherwise noted, suggested mounting height is the distance from the oor to the bottom of the dispenser.
MOD* STAINLESS STEEL RECESSED
WALL UNIT WITH TRASH RECEPTACLE
Full recessed wall unit with trash receptacle is made from a 20 gauge brushed stainless steel. The
unit is built with welded construction, seamless corners and burr-free edges. The 9.22 gal.capacity
leakproof molded trash container is hidden behind a reversible stainless steel door that can quickly
be flipped to change the swing direction of the door. The full wall unit when combined with our Narrow
SS Dispenser Housing (31498) and Electronic Module allows the system to be installed between wall
studs on 12 inch centers. A slightly wider SS Dispenser Housing (31501) also fits the wall unit
and accepts all three versions of our dispensing modules (M-Module, E-Module and NG-Module).
Both Dispenser Housings (31498-Narrow, 31501-Zero) and their respective modules will dispense one
8” diameter roll of 700’ or 1150’ product plus stub roll utilizing core plug mounting.
Suggested mounting height is 48” maximum from towel discharge opening to finished floor.
Dispenser Housing Codes
MOD* Stainless Steel Recessed Dispenser Housing • Narrow 31498
MOD* Stainless Steel Recessed Dispenser Housing • Zero 31501
3.82
10.34
3.80
5.45
17.13
3.283.51
56.00
24.03
Rough Wall Opening:
• 11˝ Wide – with 31498 Housing
• 11½˝ Wide – with 31501 Housing
• 54½˝ High
• 4˝ Min. Depth
Door Swing
Clearances