Test Report No.
DIGITAL TV OWNER’S MANUAL MT-SYKIT32E1AB Please read this manual carefully before operating your set. Retain it for future reference.
WARNING / CAUTION WARNING/CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
WARNING / CAUTION To prevent fire or shock hazards, do not expose this product to rain or moisture. FCC NOTICE Class B digital device This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Important Safety Instructions 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9.
Important Safety Instructions 16.To completely disconnect this apparatus from the AC Mains, disconnect the mains plug from the AC receptacle. 17.The mains plug of the power supply cord shall remain readily operable. 18.This apparatus shall be connected to a Mains socket outlet with a protective earthing connection. NOTE Prolonged use of headphones at a high volume may cause health damage on your ears.
Contents WARNING / CAUTION 3-4 Important Safety Instructions 5-6 Contents 7-8 Accessories Supplied Accessories Installing Batteries 9 9 9 Controls And Connectors Front Panel Rear Panel Remote Control 10-13 10 11 12-13 Installation Stand Installation Wall mount Installation Desktop Pedestal Installation 14-15 14 15 15 Connections Antenna Connection VCR Connection DVD Connection HDSTB Connection External A/V Source Digital Audio Out PC Connection Resolution 16-25 16 17-18 19-20 21-22 23 23 24 25
Contents CTI(Color Transient Intensity) Flesh Tone Adaptive Luma Control 38 39 40 Sound Controls Auto Sound Controls Manual Sound Controls Digital Output Auto Volume Control Stereo/SAP Broadcast Setup 41-44 41 42 43 44 44 Time Setting Time Zone Setting Auto Time Setting Manual Time Setting Auto On/Off Time Setting Sleep Timer 45-49 45 46 47 48 49 Captions Closed Caption-Analog Closed Caption-Digital Closed Caption Options 50-52 50 51 52 Reset Reset Default 53 53 Parental Control Enter your passwor
Accessories Supplied Accessories Ensure that the following accessories are included with your product. If an accessory is missing, please contact our support department at (866) 280-1998 or contact us through our website located at www.soyo.com/content/Product_Support/147 User must use shielded signal interface cables with ferrite cores to maintain standard compliance for the product. 1. Remote 2. Batteries 3. Power Cord 4. Owner’s Manual 5.
Controls And Connectors Front Panel VOL VOL 1 CH CH TV/AV MENU 6 1. VOL + / VOL Adjusts menu setting. Adjusts sound level. 2. CH + / CH Select a channel. 3. TV/AV Selects the TV, AV, S-Video, YPbPr, VGA or HDMI mode. 4. MENU Display on screen menus. 5. POWER Switches the set on or off. 6. Power Indicator Illuminates in bright blue when the TV is in standby mode. Illuminates in dark blue when the TV is switched on. Remote control sensor Accepts the IR signal of remote controller.
Controls And Connectors Rear Panel COMPONENT IN HDMI/DVI IN RGB IN (PC) L R AUDIO Y 1 2 Pb VIDEO 3 S-VIDEO IN AV IN VIDEO Pr AUDIO IN (RGB/DVI) ANTENNA/ CABLE IN DIGITAL AUDIO OUT(COAXIAL) AC IN 6 7 8 9 R L AUDIO 4 1. HDMI/DVI IN Connect to the HDMI jack for device with HDMI output. (This input can also be used as a DVI connection with an HDMI to DVI adaptor and separate analog audio inputs.) 2. RGB IN (PC) Connect to the video output jack on your PC. 3.
Controls And Connectors Remote Control - All the functions can be controlled with the remote control handset. - Some functions can also be adjusted with the buttons on the side panel of the set. - Before using remote control handset, please install the batteries. 1. POWER Switches the set on or off. POWER SOURCE 1 3 2 1 2 3 4 5 6 7 8 9 4 6 3. NUMBER BUTTONS Selects channel numbers. 5 8 0 EXIT VOL CH 2. SOURCE Selects the TV, AV, S-Video, YPbPr, VGA or HDMI mode. 4.
Controls And Connectors 10. MENU Display on screen menus. POWER 11. MUTE Switches the sound on or off. SOURCE 12. 1 2 3 4 5 6 7 8 9 Recalls your preferred picture setting. 13. Recalls your preferred sound setting. 0 14. SLEEP Sets the sleep timer. EXIT VOL CH 15. ZOOM Selects your desired picture format. OK MENU 10 13 MUTE IPI ISI CC MTS SEELP ZOOM 12 16 17 11 14 15 EPG DISPLAY 19 18 16. CC Select the Caption menu directly. 17.
Installation Stand Installation 1. Carefully place the product screen side down on a cushioned surface that will product and screen from damage. 2. Assemble the product stand with the product as shown. 3. Install the 5 bolts securely, in the back of the product in the holes provided.
Installation Wall mount Installation 4 inches 4 inches 4 inches 4 inches 4 inches The set can be installed on a wall as shown above. For proper ventilation, allow a clearance of 4 inches on all four sides from the wall. Detailed instructions are available from your dealer, refer to the optional Wall Mounting Bracket Installation and Setup Guide. (Wall Mount Sold Separately) Desktop Pedestal Installation 4 inches 4 inches 4 inches 4 inches The set can be mounted on a desk as shown above.
Connections Antenna Connection Multi-family Dwellings/ Apartments (Connect to wall antenna socket) VIDEO ANTENNA/ CABLE IN AUDIO IN (RGB/DVI) AV IN DIGITAL AUDIO OUT(COAXIAL) R L AUDIO Wall Antenna Socket RF Coaxial Wire (75 ohm) Turn clockwise to tighten. VHF UHF Outdoor Antenna Be careful not to bend the bronze wire when connecting to an antenna port.
Connections VCR Connection - To avoid picture noise (interface), leaves an adequate distance between the TV and the VCR. A When connecting with an antenna 1. Connect the Antenna out socket of the VCR to the Antenna input socket on the TV. VCR ANT IN (R) AUDIO (L) ANT OUT VIDEO OUT S-VIDEO IN DIGITAL AUDIO OUT(COAXIAL) R L VIDEO ANTENNA/ CABLE IN AUDIO IN (RGB/DVI) AV IN 2. Press the Power button on the VCR and match the appropriate input selection between the TV and VCR for viewing.
Connections A When connecting with a S-Video cable VCR ANT IN VIDEO ANT OUT S-VIDEO OUT OUTPUT SWITCH IN (L) AUDIO (R) 1. Connect the S-VIDEO output of the VCR to the S-VIDEO input on the set. The picture quality is improved; compared to normal composite (RCA cable) input. 2. Connect the audio outputs of the VCR to the AV AUDIO L, R input jacks on the set. 3. Insert a video tape into the VCR and press PLAY on the VCR.
Connections DVD Connection A When connecting with a S-Video cable DVD 1. Connect the S-VIDEO output of the DVD to the S-VIDEO input on the set. ANT IN VIDEO ANT OUT S-VIDEO OUT OUTPUT SWITCH IN (L) AUDIO (R) 2. Connect the audio outputs of the DVD to the AV AUDIO L, R input jacks on the set. 3. Turn on the DVD player, insert a DVD. 4. Select S-Video input source with using the SOURCE button on the remote control. COMPONENT IN L R AUDIO Y Pb VIDEO S-VIDEO IN Pr AV IN VIDEO L R AUDIO 5.
Connections A When connecting with a HDMI cable 1. Connect the HDMI output of the DVD to the HDMI/DVI IN jack on the set. DVD HDMI-DVD OUTPUT 2. Select HDMI input source with using the SOURCE button on the remote control. 3. Refer to the DVD player's manual for operating instructions.
Connections HDSTB Connection - This TV can receive Digital Over-the-air/Cable signals without an external digital set-top box. However, if you do receive Digital signals from a digital set-top box or other digital external device, refer to the figure as shown below. A When connecting with a D-Sub 15 pin cable Digital Set-top Box (R) AUDIO (L) 1. Connect the RGB output of the digital set-top box to the RGB IN (PC) jack on the set. RGB-DTV OUTPUT 2.
Connections A When connecting with a Component cable Digital Set-top Box Y Pb 1. Connect the video outputs (Y, PB, PR) of the digital set-top box to the COMPONENT VIDEO(Y, Pb, Pr) jacks on the set. (L) AUDIO (R) Pr 2. Connect the audio outputs of the digital set-top box to the COMPONENT AUDIO L, R jacks on the set. 3. Turn on the digital set-top box. COMPONENT IN L S-VIDEO IN R AUDIO Y Pb VIDEO Pr AV IN VIDEO L R AUDIO Back panel of the set 4.
Connections External A/V Source VIDEO 1. Connect the AUDIO/VIDEO jacks between TV and external equipment. Match the jack colors (Video = yellow, Audio Left = white, and Audio Right = red) L-AUDIO-R OUT Camcorder Video game set 2. Select the AV input source with using the SOURCE button on the remote control. 3. Operate the corresponding external equipment. COMPONENT IN L R AUDIO Y Pb VIDEO S-VIDEO IN Pr 4. Refer to the external equipment manual for operating instructions.
Connections PC Connection A When connecting with a D-Sub 15 pin cable PC AUDIO OUT 1. Connect the RGB output of the PC to the RGB IN(PC) jack on the set. PC OUTPUT 2. Connect the PC audio outputs to the AUDIO IN (RGB/DVI) jack on the set. 3. Turn on the PC and the set. 4. Select VGA input source with using the SOURCE button on the remote control.
Connections Resolution Resolution Horizontal Frequency (kHz) Vertical Frequency (Hz) 640 x 480 31.47 59.94 35.16 56.25 37.88 60.32 48.36 60.00 800 x 600 1024 x 768 NOTE a. The synchronization input form is separate. b. If the resolution is not supported, ‘Not Support!’ message will be displayed.
Basic Operation Turning On or Off Standby Setup: The AC power cord must be connected to have the TV in standby mode and ready to be turned on. Press the ON/OFF button on the side panel of the TV to go into standby mode. 1. If the TV is in standby mode, press the POWER button on the remote or the TV itself to turn the TV on. 2. Press the POWER button again on the remote controller or the TV itself to turn the TV off.
Basic Operation Input Selection 1. Press the SOURCE button to change the input mode. Input Source TV 2. Press the Down or Up button to select your desired mode. AV S-Video YPbPr 3. Press the OK button to change your selected mode. VGA HDMI Language Selection 1. Press the MENU button and then press the Down or Up button to select the Setup. 2. Press the OK button and then press the Down or Up button to select OSD Language.
On Screen Menus Your TV’s OSD(On Screen Display) may differ slightly from what is shown in this manual. 1. Press the MENU button and then use Down or Up button to select each menu. 2. Press the OK button and then Down, Up, Left and Right buttons to navigate to the available menus.
Setting up TV Channel Auto Scan Automatically finds all channels available through the Antenna or Cable and stores them in memory on the channel list. 1. Press the MENU button and then press the Down or Up button to select the TV. 2. Press the OK button and then press the Down or Up button to select Tuner Mode. Video Audio Tuner Mode Channel Scan Channel Skip Cable F G G G TV G Setup Parental 3. Press the Left or Right button to select Antenna or Cable. TV 4.
Setting up TV Channel Add/Delete Channel You can manually store or remove channels in whatever order you desire. 1. Press the MENU button and then press the Down or Up button to select the TV. 2. Press the OK button and then press the Down or Up button to select Channel Skip. Video Audio Tuner Mode Channel Scan Channel Skip Cable F G G G TV G Setup Parental 3. Press the OK button and then press the Down or Up button to select channel you want to add or delete.
Setting up TV Channel EPG(Electronic Program Guide) Displays Broadcasting guide of received channel. 1. Press the EPG button to display the Electronic Program Guide. 2. Press the Left or Right button to change channel and display the broadcasting guide at the bottom of the screen.
Picture Controls Auto Picture Controls Picture Mode adjusts the set for the best picture appearance. Select the preset value in the Picture Mode menu. 1. Press the MENU button and then press the Down or Up button to select the Video. 2. Press the OK button and then press the Down or Up button to select Picture Mode. G Video Audio TV Setup Parental 3. Press the Left or Right button to select Soft, Standard, Vivid or User.
Picture Controls Manual Picture Controls You can adjust picture Brightness, Contrast, Saturation, HUE and Sharpness to the levels you prefer. 1. Press the MENU button and then press the Down or Up button to select the Video. 2. Press the OK button and then press the Down or Up button to select desired picture option. (Brightness, Contrast, Saturation, HUE, Sharpness) G Video Audio TV Setup Parental Video 3. Press the OK button and then press the Left or Right button to make appropriate adjustments.
Picture Controls Color Temperature You can adjust to color temperature you prefer. 1. Press the MENU button and then press the Down or Up button to select the Video. G Video Audio TV 2. Press the OK button and then press the Down or Up button to select Color Temperature. Setup Parental 3. Press the OK button and then press the Left or Right button to select Cool, Standard, Warm or User. Video G 4. Press the Down or Up button to select desired color item.
Advanced Video Dynamic Noise Reduce Use this feature to reduce picture artifacts caused by the digitizing of image motion content that may be present in the picture. 1. Press the MENU button and then press the Down or Up button to select the Video. G Video Audio TV 2. Press the OK button and then press the Down or Up button to select Advanced Video. Setup Parental 3. Press the OK button and then press the Down or Up button to select DNR. 4.
Advanced Video Black Level Extender Use this feature to increase the picture reproduction performance in the dark areas of the picture. 1. Press the MENU button and then press the Down or Up button to select the Video. G Video Audio TV 2. Press the OK button and then press the Down or Up button to select Advanced Video. Setup Parental 3. Press the OK button and then press the Down or Up button to select Black Level Extender. 4. Press the Left or Right button to select On or Off.
Advanced Video White Peak Limiter Use this feature to limit excessive amounts of white in bright areas of the picture, this is caused by a lower sync level from a channel being received from the antenna or cable. 1. Press the MENU button and then press the Down or Up button to select the Video. G Video Audio TV 2. Press the OK button and then press the Down or Up button to select Advanced Video. Setup Parental 3. Press the OK button and then press the Down or Up button to select White Peak Limiter. 4.
Advanced Video CTI(Color Transient Intensity) This feature can be used to reduce the time taken to transition from one color to another. The effect will be seen as sharpening the border between colors. 1. Press the MENU button and then press the Down or Up button to select the Video. G Video Audio TV 2. Press the OK button and then press the Down or Up button to select Advanced Video. Setup Parental 3. Press the OK button and then press the Down or Up button to select CTI. 4.
Advanced Video Flesh Tone In some cases, activation of this feature can result in a more pleasing production of sky and flesh color. 1. Press the MENU button and then press the Down or Up button to select the Video. G Video Audio TV 2. Press the OK button and then press the Down or Up button to select Advanced Video. Setup Parental 3. Press the OK button and then press the Down or Up button to select Flesh Tone. 4. Press the Left or Right button to select On or Off. Video G Video Audio 5.
Advanced Video Adaptive Luma Control Large areas of darkness in a picture will result in a lower Average Picture Level (APL) and the overall picture will look too dark; activation of this feature will raise the APL to counteract this effect. 1. Press the MENU button and then press the Down or Up button to select the Video. G Video Audio TV 2. Press the OK button and then press the Down or Up button to select Advanced Video. Setup Parental 3.
Sound Controls Auto Sound Controls This Sound Mode automatically adjusts the sound controls to the recommended settings. 1. Press the MENU button and then press the Down or Up button to select the Audio. 2. Press the OK button and then press the Down or Up button to select Sound Mode. Video G Audio TV Setup Balance Bass Treble Sound Mode Digital Output Auto Volume Control 0 40 40 Voice Off Off F G F G F G Parental 3. Press the Left or Right button to select Voice, Concert, Jazz or User.
Sound Controls Manual Sound Controls This function allows you to manually adjust the audio settings to your preferred levels. 1. Press the MENU button and then press the Down or Up button to select the Audio. 2. Press the OK button and then press the Down or Up button to select desired picture option. (Bass, Treble, Balance) 3. Press the OK button and then press the Left or Right button to make appropriate adjustments. Video G Audio TV Setup Bass This adjusts the range of the low pitch sound.
Sound Controls Digital Output This option activates Digital Audio Output. This is recommended for use with other devices capable of receiving digital audio signals. (This mode is set to Off by default) 1. Press the MENU button and then press the Down or Up button to select the Audio. 2. Press the OK button and then press the Down or Up button to select Digital Output.
Sound Controls Auto Volume Control This function automatically stabilizes the volume level while changing to channels with different audio levels. 1. Press the MENU button and then press the Down or Up button to select the Audio. 2. Press the OK button and then press the Down or Up button to select Auto Volume Control. Video G Audio TV Setup Balance Bass Treble Sound Mode Digital Output Auto Volume Control 0 40 40 Voice Off Off F G F G F G Parental 3.
Time Setting Time Zone Setting You can set the Time Zone for your local area. This is operated from the Auto Synchronization. 1. Press the MENU button and then press the Down or Up button to select the Setup. 2. Press the OK button and then press the Down or Up button to select Time Setup. Video Audio TV G OSD Language Time Setup Caption Reset Default English F G G G G Setup Parental 3. Press the OK button and then press the Down or Up button to select Time Zone. 4.
Time Setting Auto Time Setting The time is set automatically from a digital channel signal. The digital channel signal includes information for the current time provided by the broadcasting station. Set the time manually if the current time is set incorrectly by the Auto Synchronization function. 1. Press the MENU button and then press the Down or Up button to select the Setup. 2. Press the OK button and then press the Down or Up button to select Time Setup.
Time Setting Manual Time Setting If the current time setting is wrong, this function allows you to set the clock manually. 1. Press the MENU button and then press the Down or Up button to select the Setup. 2. Press the OK button and then press the Down or Up button to select Time Setup. Video Audio TV G OSD Language Time Setup Caption Reset Default English F G G G G Setup Parental 3. Press the OK button and then press the Down or Up button to select Time. Setup 4.
Time Setting Auto On/Off Time Setting The timer function operates only if the current time has been set. The TV turns on/off automatically with the Power On/Off Timer function. 1. Press the MENU button and then press the Down or Up button to select the Setup. 2. Press the OK button and then press the Down or Up button to select Time Setup. Video Audio TV G OSD Language Time Setup Caption Reset Default English F G G G G Setup Parental 3.
Time Setting Sleep Timer The sleep timer automatically switches the set to standby after the preset time elapses. 1. Press the MENU button and then press the Down or Up button to select the Setup. 2. Press the OK button and then press the Down or Up button to select Time Setup. Video Audio TV G OSD Language Time Setup Caption Reset Default English F G G G G Setup Parental 3. Press the OK button and then press the Down or Up button to select Sleep Timer. 4.
Captions Closed Caption-Analog The Analog Caption function operates when watching regular analog channels. Analog caption displays information at any position on the screen and is usually the program’s dialog. 1. Press the MENU button and then press the Down or Up button to select the Setup. 2. Press the OK button and then press the Down or Up button to select Caption. Video Audio TV G OSD Language Time Setup Caption Reset Default English F G G G G Setup Parental 3.
Captions Closed Caption-Digital The Digital Caption function only operates on digital channels. Choose the language you want the DTV captions to appear in. 1. Press the MENU button and then press the Down or Up button to select the Setup. 2. Press the OK button and then press the Down or Up button to select Caption. Video Audio TV G OSD Language Time Setup Caption Reset Default English F G G G G Setup Parental 3.
Captions Closed Caption Options Customize the DTV captions that appear on your screen. 1. Press the MENU button and then press the Down or Up button to select the Setup. 2. Press the OK button and then press the Down or Up button to select Caption. Video Audio Analog Closed Caption Digital Closed Caption Digital Caption Style Off Off F G F G G TV G Setup Parental 3. Press the OK button and then press the Down or Up button to select Digital Caption Style. Caption 4.
Reset Reset Default Use to quickly reset all the menu options to their original factory preset values. This function deletes all TV channels. 1. Press the MENU button and then press the Down or Up button to select the Setup. 2. Press the OK button and then press the Down or Up button to select Reset Default. Video Audio TV G OSD Language Time Setup Caption Reset Default English F G G G G Setup Parental 3. Press the OK button and then press the Left or Right button to select OK.
Parental Control Enter your password Parental Control can be used to block specific channels, ratings and other viewing sources. Set up blocking schemes to block specific channels, ratings, and external viewing sources. A password is required to gain access to this menu. 1. Press the MENU button and then press the Down or Up button to select the Parental. Video Password Audio TV 2. Press the OK button and then enter password as requested. Setup G Parental 3.
Parental Control Rating Enable/Disable Enables or disables the blocking scheme you set up previously. 1. After inputting the password, press the Down or Up button to choose Program Block. Video Audio Program Block Change Password Clean All G G G TV 2. Press the OK button and then press the Down or Up button to select Rating Enable. Setup G 3. Press the Left or Right button to select On or Off. When you select On, the Program Block menus are enable. Parental Parental Video 4.
Parental Control TV Ratings for USA Prevents children from watching certain TV programs, according to the rating limits set. The children rating will not apply to TV programs until you select the ratings you want to be blocked. 1. After inputting the password, press the Down or Up button to choose Program Block. Video Audio Program Block Change Password Clean All G G G TV 2. Press the OK button and then press the Down or Up button to select U.S. TV Ratings. Setup G Parental 3. Press the OK button.
Parental Control TV (FCC) Age Categories TV-MA Mature audiences only. This program may contain mature themes, profane language, graphic violence and explicit sexual content. TV-G General audience. This contains little or no violence, no strong language, and little or no sexual dialog or situations. TV-14 Parents strongly cautioned. This program may contain sophisticated themes, sexual content, strong language and more intense violence. TV-Y7 Directed for older children.
Parental Control Movie Ratings Blocks movies according to the movie ratings limits specified so children cannot view certain movies. Applies to movies broadcasted on TV and allows you to select which ratings you want blocked. 1. After inputting the password, press the Down or Up button to choose Program Block. Video Audio Program Block Change Password Clean All G G G TV 2. Press the OK button and then press the Down or Up button to select U.S. Movie Ratings. Setup G Parental 3. Press the OK button.
Parental Control TV Rating English for Canada Selecting canadian english language rating system. 1. After inputting the password, press the Down or Up button to choose Program Block. Video Audio Program Block Change Password Clean All G G G TV 2. Press the OK button and then press the Down or Up button to select Canadian English Ratings. Setup G Parental 3. Press the OK button. Parental 4. Press the Down or Up buttons to choose and OK button to set up the menu options for Canadian English Ratings.
Parental Control TV Rating French for Canada Selecting canadian french language rating system. 1. After inputting the password, press the Down or Up button to choose Program Block. Video Audio Program Block Change Password Clean All G G G TV 2. Press the OK button and then press the Down or Up button to select Canadian French Ratings. Setup G Parental 3. Press the OK button. Parental 4. Press the Down or Up buttons to choose and OK button to set up the menu options for Canadian French Ratings.
Parental Control Downloadable Rating Your TV’s OSD (On Screen Display) may differ slightly from what is shown in this manual. 1. After inputting the password, press the Down or Up button to choose Program Block. Video Audio Program Block Change Password Clean All G G G TV 2. Press the OK button and then press the Down or Up button to select Open V-Chip. Setup G Parental 3. Press the OK button twice. Parental 4. Press the Down or Up buttons to choose the menu options for Open V-Chip.
Parental Control Clean All Use to quickly clean the Program Block menu options. 1. After inputting the password, press the Down or Up button to choose Clean All. Video Audio G G Setup G Parental Parental ENTER Enter 4. Press the MENU button to return to the previous menu. Select Are you sure? OK 62 G TV 2. Press the OK button and then press the Left or Right button to select OK. 3. Press the OK button to clean the Program Block menu options.
Setting the PC Mode Auto Picture Controls Picture Mode adjusts the set for the best picture appearance. Select the preset value in the Picture Mode menu. 1. Press the MENU button and then press the Down or Up button to select the Video. 2. Press the OK button and then press the Down or Up button to select Picture Mode. 3. Press the Left or Right button to select Soft, Standard, Vivid or User.
Setting the PC Mode Manual Picture Controls You can adjust picture Brightness, Contrast and HUE to the levels you prefer. 1. Press the MENU button and then press the Down or Up button to select the Video. 2. Press the OK button and then press the Down or Up button to select desired picture option. (Brightness, Contrast, HUE) 3. Press the OK button and then press the Left or Right button again to make appropriate adjustments. 4. Press the MENU button to return to the previous menu.
Setting the PC Mode Color Temperature Adjusts the display to your desired color temperature. 1. Press the MENU button and then press the Down or Up button to select the Video. G Audio Setup 2. Press the OK button and then press the Down or Up button to select Color Temperature. Parental 3. Press the OK button and then press the Left or Right button to select Cool, Standard, Warm or User. Video G 4. Press the Down or Up button to select desired color item.
Setting the PC Mode Auto Adjustment This function is for the automatic adjustment of the screen position, clock, phase and scale in pc mode. The displayed image will disappear for a few seconds while the auto configuration is in progress. Although the image is still not correct, your set is functioning properly but needs further adjustment. 1. Press the MENU button and then press the Down or Up button to select the Video. Video G Audio Setup 2.
Setting the PC Mode Manual Adjustment If the picture isn’t clear after auto adjustment and especially if characters are still trembling, adjust the picture phase manually. To correct the screen size, adjust Clock. 1. Press the MENU button and then press the Down or Up button to select the Video. Video G Audio Setup 2. Press the OK button and then press the Down or Up button to select VGA. Parental 3. Press the OK button and then press the Down or Up button to select H.Position or V.Position. 4.
Special Functions Picture Format You can watch the screen in various picture formats; 4:3, ZOOM, Auto, Full. If a fixed image is displayed on the screen for a long time, that fixed image may become imprinted on the screen and remain visible. Repeatedly press the ZOOM button to select your desired picture format. A 4:3 Following selection will lead you to view a picture with an original 4:3 aspect ratio, with gray bars appearing at both the left and right sides.
Specification Model Dimension MT-SYKIT32E1AB Horizontal 796.0 mm Height 583.0 mm Thickness 233.0 mm Weight Contrast Ratio Brightness Panel Resolution 14.3 kg 1,000:1 typical 500 cd/m2 typical 1366 (H) x 768 (V) Display Color 16.7M colors Audio Output 2.5W + 2.
Troubleshooting Problem No picture on screen. Check Point O O O O The remote control doesn’t work. O O Picture appears slowly, after switching on. No or Poor color Horizontal/Vertical bars or picture shaking Unusual sound from inside the set. 70 O O O O Check whether the set is turned on. Power cord inserted into wall outlet? Test if there is power coming from the wall outlet by plugging in another product into the wall outlet where the set’s power cord was plugged in.
MEMO 71
SOYO End-User One Year Limited Warranty SOYO, Inc. warrants all SOYO brand products you have purchased from SOYO or from a SOYO authorized reseller / retailer to be free from defects in materials and workmanship under normal use during the warranty period and subject to the terms and conditions set forth below, in the continental United State, Hawaii, Alaska and Canada. If the Product becomes defective during the warranty period SOYO will, at its option, repair or replace the product.
IMPORTANT! Please fill out and return within the next 10 days. PRODUCT REGISTRATION This is your SOYO Product Registration Card. Proper registration can serve as proof of purchase in the event your original receipt becomes misplaced or lost. Returning this card will not affect warranty coverage, but may expedite the processing of warranty claims. The additional information will also help us to develop new products that best meet your needs and desires. Part1 MR. MRS. MS.
Please seal with tape. Do not staple. MARKETING DEPARTMENT 1420 S. VINTAGE AVE. ONTARIO, CALIFORNIA 91761 USA Visit our website at http://www.soyo.com PRODUCT REGISTRATION DEPARTMENT 1420 S. VINTAGE AVE. ONTARIO, CA 91761-3646 cut here If you have comments or suggestions about our product, please write to: First-Class Postage Required. Post Office will not deliver without proper postage.
www.soyo.com A Publicly Traded Company : SOYO Copyright © 2008 SOYO Group, Inc. All other trademarks and logos are property of their respective owners. All specifications are subject to change without notice. P/NO : 3350GDKM0054A GPN08MA033A DIGITAL TV 1420 South Vintage Ave.
