Product Brochure

4
KINDORF® METAL FRAMING SYSTEM METAL FRAMING CHANNEL & ACCESSORIES
—
Overview
Kindorf
®
Channel’s 1½" is much more
than a cross-section dimension
The 1½" with Kindorf
®
channel is truly a modular dimension. The channel height, width and
prepunched hole spacings are all engineered around 1½" increments. The angle fittings and
the bolt holes in the angle fittings are all engineered around 1½" increments as well.
Jobsite adaptability and structural integrity are the
key factors in making strut channel an economical
solution to metal framing needs. Kindorf
®
channel, with its 1½" modular dimensions, enables
the installer to do more work with fewer pieces
and less labor dollars.
Kindorf
®
Channel
The Kindorf
®
Channel System is designed so that
the maximum number of support and framing
applications can be constructed with a minimum
amount of labor and pieces.
Uniqueness in design
The 1½" dimension in the channel, hole spacing
and fittings means all parts fit together, no matter
where they’re used, or at what angle. This modular
dimension provides maximum flexibility in field
applications, and results in saving inventory
and labor dollars. The Kindorf
®
channel exclusive
—
01 1½" wide x 1½" deep

10 ft and 20 ft lengths.
—
02 Kindorf
®
channels make
it easy to cut: Scribe
marks are located at 1½"
intervals to mark the
midpoint between holes
and every 6" on the side
for easy measurement.
Galv-Krom
®
finish provides superior corrosion
protection for all threaded components,
channel and fittings. Through a two part process,
the coating is applied on all finished parts
after fabrication – there is no exposed surface
where corrosion can start.
Strength
Even though the Kindorf
®
channel is slightly
smaller in dimensions, it supports the same


The Kindorf
®
System is designed so that most

Conduit and pipe straps will work equally well

accessories are interchangeable with Kindorf
®
channel. Angle fittings can adapt easily to the

parallelogram nuts provide secure attachment
to both types of strut.
Full line of support products
The Kindorf
®
channel system’s many advantages
are extended into a broad product offering
including beam clamps, concrete inserts,
lighting supports, cable cleats and a variety of
threaded components. This system is
available in the largest selection of finishes
and materials, including green coated, aluminum,
stainless steel and non-metallic. This, combined
with a nationwide network of distributors and
service centers, makes the Kindorf
®
system
a single source for supported metal-framing needs.
13½"
13½"

—
01
Kindorf
6"
12"
18"
—
02




1½" 1½"
1½" 1½"
1½"

Standard
channel
Kindorf
®
channel