Product Brochure

52
KINDORF® METAL FRAMING SYSTEM METAL FRAMING CHANNEL & ACCESSORIES
—
Beam clamps and hanger rod supports
Structural steel clamp, swing connector clamp & anchor clip
—

Cat. No.
Dimensions (in)
Weight
(lbs/C)
Design
load (lbs)
A B C
E-231-3/8* 2½ 1  31 25
E-231-1/2** 3   53 15

* Load rating of 500 lbs. with a safety factor of 3. ** Load rating of 800 lbs. with a safety factor of 3. Galv-Krom® finish.
—

—

Cat. No.
Rod size
(in)
Max. beam
width “A” For use with
Weight
(lbs/C)
E-233-3/8-6  6 E-231-3/8 20
E-233-3/8-10  10 E-232-3/8 33
E-233-1/2-6 ½ 6 E-231-1/2 26
E-233-1/2-10 ½ 10 E-232-1/2 37
Anchor clips should be used when clamps are subject to excessive vibration. To obtain the correct size clips, add 1" to the flange width.

B
A
C
Cat. No.
Diameter
for rod (in)
Dimensions (in)
Weight
(lbs/C)
Design
load (lbs)
A B C
E-232-3/8*    1 48 25
E-232-1/2** ½    76 15
* Load rating of 400 lbs. with a safety factor of 3. ** Load rating of 550 lbs. with a safety factor of 3.
Galv-Krom® finish.

angles and columns. Two sizes

other for ½" hanger rod.
Each takes flanges up to .8".
B
A
C
E-232 clamp with swing
connector affords a convenient
method of attaching to
angled beams.
For use with E-231 and
E-232 clamps when hanger
rod is not in straight
through position.
A 