Product Brochure

59
WALL AND SUPPORT BRACKETS
Kindorf
®
wall brackets provide a ready-made shelving
arrangement that can be attached quickly to the
supporting channels. Utilizing the built-in advantages
of the Kindorf® Channel, the support bracket
members allow a great deal of flexibility in meeting
the structural framing needs. Axle supports and
a variety of wall brackets all adapt to the standard
Kindorf® channel and allow additional flexibility in the
support of cables, conduit, pipe and other
equipment. The application of axle supports and
bracket members can be made on either the
continuous slot of the channel or the pre-punched
hole side. Utilizing the 1½" hole spacing, greater
adaptability is attained with a minimum of fittings.
—
Wall and support brackets
—

Cat. No.
Dimensions (in)
Weight
(lbs/C)
A B C
F-715
  1½ 163
Mounts on Kindorf® channel or directly to wall. F-715 bracket supports 1½" or 1
Brackets allow for a variety of support channel lengths. The continuous tray on brackets
prevent lateral movement of supported channels. Support channels can be fastened from
top, bottom or both. Galv-Krom® finish.
—

—

Cat. No.
Dimensions (in)
Weight
(lbs/C)
A B C
F-716-3
  1½
179
Mounts on Kindorf® channel or directly to wall. F-716-3 bracket supports 3" deep or back-to-
back channels. Brackets allow for a variety of support channel lengths. The continuous
tray on brackets prevent lateral movement of supported channels. Support channels
can be fastened from top, bottom or both. Galv-Krom® finish.
Cat. No.
Dim. A
(in)
End load
rating (lbs)*
Weight
(lbs/C)
F720 6** 6 600 132
F-720-9** 9 450 155
F-720-12** 12 300 200
F-720-18 18 200 275
F-720-24** 24 150 350
Mounts on Kindorf® channel, concrete inserts or directly to wall. Continuous-slot accepts
C-105, C-106 and C-107 series pipe straps. Bracket is 12-gauge steel, 1½" x 1½" channel
welded to a ¼" back plate. May be attached to either the continuous slot side or pre-punched
holes in back or side of Kindorf® channel. * Safety factor of 3. ** This product available
in green & hot-dipped galvanized. Standard finish: Galv-Krom®.
F-721 Wall bracket
hangs and supports
pipe runs.
—
Conduit installations
supported above
and below by
F-721 wall bracket.
¼"
2½"

4½"
3"
1½"
1½"
¾"
A
A
B
A
C

holes.
A
B
A
C

holes.