Product Brochure

62
KINDORF® METAL FRAMING SYSTEM METAL FRAMING CHANNEL & ACCESSORIES
G-972-1/2 G-974-1-1/4
Kindorf
®
Surface Raceway channels* provide a
central wiring distribution system with conductor
capacity that exceeds requirements of any
lighting layout and with “power to spare” for other
uses. Channel adapts to any interval of structural
support – may be dropped to any level where
it becomes a rigid platform for fixture attachment.
Lighting fixtures may be spaced and fastened
anywhere along the channel system with “plug-in”
or direct-feed electrical connection.
Branch lighting circuit conductors are completely
enclosed in channel from panel to fixture,
eliminating the ordinary “clutter” of external
conductors and protecting the wires from
physical damage.
Kindorf
®
channels, installed slot-side down, are
designed to provide fixture support only.
A range of accessory fittings permit fixture
attachment to the channel safely and securely in an
approved manner. Channels with solid base or
with slots are generally used for simple channel
support systems.
Channel support systems combine economy of
investment with maximum strength and
rigidity. The continuous-slot channel provides
complete flexibility of lighting layout with fixture
spacing continuous or intermittent.
Fixtures may be added or relocated to meet
changing requirements without disturbing the
basic support system. The rigid channels maintain
fixture alignment and adapt to any interval of
structural support.
Knock-out type Plug-in type Shoulder-bolt type Spring-nut type
by means of ½" channel
knockouts on 6" centers
by means of sliding
fixture hanger
by means of special shoulder bolt

by means of spring-nut and
bolt combination
—
Surface raceway channel systems
—
Surface raceway and lighting support systems
Electrical conductors “lay-in” the channel
—
Channel support lighting systems
G-975
1½ x 1½ x 12 ga
G-975-M
1½ x 1½ x 14 ga
G-965
1½ x 1½ x 14 ga
G-955
1½ x 3 x 12 ga
B-900-M
1½ x 1½ x 14 ga
B-900
1½ x 1½ x 12 ga
B-901

B-906
1½ x ¾ x 14 ga
Nipple lock nut
and bushing
Hanger with H-115-A
bolt and square
nut plus G-1016 and
H-118-C washers
G-1012
G-953
1½ x 1½ x 12 ga
G-956
1½ x 1½ x 12 ga
G-973-2-1/4
B-906
1½ x ¾ x 14 ga
B-900-M
1½ x 1½ x 14 ga
B-900
1½ x 1½ x 12 ga
B-901

G-902
1½ x 3 x 12 ga
B-911-1/4
H-111-B
—
* Listed by Underwriters
