Product Brochure

73
The direction-change joiner fittings for Kindorf®
Channels* expand to three, the number of channel
depths available for complete raceway wiring

3" depths of 1½" wide channels.
These three systems provide raceway conductor
fill capacities for any lighting layout and with erected
strength to spare for lighting fixture support.
The joiner fitting rests inside the channel without
obstructing the channel, or the lay-in of electrical
conductors. No time-consuming “fishing”
of conductors at the elbows, tee and crosses.

end of the channel and turn the captive set-screw.
This “jack-screws” the fitting sidewalls beneath
the channel lips for snug, strong joints. Standard
Kindorf® Channel Closure Strip is used for a
completely enclosed raceway.
—
Surface raceway and lighting support systems
Channel joiners for "lay-in" wiring
SURFACE RACEWAY AND LIGHTING SUPPORT SYSTEMS
—
04
—
02
—
03
—
01
—

Cat. No.
For use with channel no.
Weight
(lbs/C)
G-1500-X B-900 & G-975 44
G-1870-X B-901 & G-965 51
G-3000-X B-902 & G-955 79
Galv-Krom® finish.
—

Cat. No.
For use with channel no.
Weight
(lbs/C)
G-1501-T B-900 & G-975 34
G-1871-T B-901 & G-965 45
G-3001-T B-902 & G-955 66
Galv-Krom® finish.
—
* Listed by Underwriters

—
01 Tee (T)
—
02 Elbow (L)
—
03 Cross (X)
—
04 Straight (S)
"
"
1"
1"
"
"