Product Brochure

77
HARDWARE AND THREADED COMPONENTS
“Threads” are an integral part of erector systems
because nearly everything hangs by or is secured by
threaded fasteners. Kindorf® threaded hardware
includes continuous rolled-thread hanger rod,
and special and standard screws and nuts designed
with the necessary holding power to serve the
requirements of framing and hanging installations.

rust and corrosion because they are usually exposed
to corrosive atmospheres. Kindorf® threaded
hardware and accessories are completely protected
by the same Galv-Krom® finish that protects Kindorf®
channel and fittings. Kindorf® extra-quality threads
are always:
• Free-running – clean, uniform
• Corrosion resistant – no paint required
• Burr-free – smooth finish
Trouble-free threaded hardware is an investment
in fast installation and low maintenance.
Free-running threads are a time saving asset on
every job – saving fingers and tempers, and
eliminating delays that result when threads must
be specially treated before use. Threaded rod is
packed in tubes to prevent damage during shipment.
Kindorf® threaded hardware is produced from
high-tensile strength carbon steel with
Unified National Coarse (U.N.C.) threads.
Galv-Krom® finish is standard.
—
Hardware and threaded components
Cat. No.
Size
Weight
(lbs/100 PCS)
H104-1/4X6
¼" – 20
73
H104-1/4X10 124
H104-1/4X12 148
H104-3/8X6

172
H104-3/8X10 293
H104-3/8X12 348
H104-1/2X6
½" – 13
313
H104-1/2X10 530
H104-1/2X12 648
H104-5/8X6

510
H104-5/8X10 850
H104-5/8X12 1,020
Suffix indicates rod size and length.
—

Cat. No.
Size
Weight
(lbs/100 PCS)
H104-1/4X6-EG
¼" – 20
73
H104-1/4X10-EG 124
H104-1/4X12-EG 148
H104-3/8X6-EG

172
H104-3/8X10-EG 293
H104-3/8X12-EG 348
H104-1/2X6-EG
½" – 13
313
H104-1/2X10-EG 530
H104-1/2X12-EG 648
H104-5/8X6-EG

510
H104-5/8X10-EG 850
H104-5/8X12-EG 1,020
Suffix indicates rod size and length.
—

Size (in)
Threads
per inch (lbs/100 ft)
Design
load (lbs)
¼ 20 12.5 150
 16 29 610
½ 13 53.5 1,130
 11 85 1,810
¾ 10 123 2,710
 9 130 3,770
1 8 214 4,960
Grade ASTM A-510.
—
National coarse thread