Product Brochure
82
KINDORF® METAL FRAMING SYSTEM METAL FRAMING CHANNEL & ACCESSORIES
—
Cable and mounting systems
Kindorf
®
J-800 system
Designed originally to eliminate costly and time
consuming methods of installing cables aboard
ships, the Kindorf
®
J-800 series of straps, hangers
and brackets has found ever-widening applications
by mechanical and electrical contractors in
general construction. The J-800 system has proven
to be a work-saver when used to install tubing or
cable. Tubing and cable of various construction and
fabrication can be racked efficiently with built-in
provisions for making additions or changes at a
later date. They can be secured in all combinations
and sequences of sizes. A variety of hangers
and brackets secures multiple runs as well as
single branch take-offs.
®
supports is
simple, requiring only a screwdriver or small wrench.
Each run is gripped individually on a hanger and all
runs are secured by tightening a single locking
device. Loosening the locking device permits fast
access to the runs, making it easy to add, remove or
adjust them at any time.
J-800 installations have withstood the severe
conditions of service at sea for many years.
ability to withstand the effects of salt air, moisture,
shock and vibration. J-800 racking is well known
for its fast, yet precise, installation method.
A proven method that results in labor economy
and neat, workman-like installation.
1
2
3
4
5
6
—
slot of hanger.
—
02 Close Kindorf
®
cable
strap down over cable.
—
03 Push strap and cable
to end of hanger slot
so tongue of strap hooks
below slot.
—
04 Apply second cable
strap, hooking strap
tongue under pin
of first strap.
—
05 Apply locking device
and tighten screw
moderately.
—
06 Drive locking device
tight against cable
strap. Tighten locking
device screw.
—
07
—
08
—
09
—
10
—
07 Copper tubing.
—
08 Shipboard cables.
—
09 Flexible tubing.
—
10 Armored cable
(Take-off from cable tray).