Product Brochure

91
Cleat
—
Nuts serrated – For self-locking
Cat. No. Std. Ctn.
Weight
per 100 sets
RA-BN-5/8 100 
RA-BN-3/4 100 

—
Gusset plate
Cat. No. Std. Ctn.
Weight
per 100 sets
RA-GP 25 10
—
Portable Cutter
Cat. No. Std. Ctn.
Weight
each
RA-C 1 17
—

Cat. No. Std. Ctn.
Weight
each
RA-RC 2 2
RA-SC 2 3
RIGHT ANGLE SLOTTED ANGLE SYSTEMS
Hard rubber composition.
3½" diameter with load rating of
225 lbs per wheel. Plate has

mounting on all three types of
slotted angle.
Designed for use with all
three types of slotted angle.
Cuts with single stroke of handle.
Produces clean, burr-free cuts.
Three hole connector for extra rigid
angle assembly. For use with all
three types of right angle. Galvanized
steel. For proper assembly, insert
plate between the angle flanges
for 3-bolt connection.
100 sets per package


and RA-225. No. RA-BN-3/4,

RA-RC
RA-SC
—
Helpful hints to maximize
right angle erection.
Slot and hole pattern
The Right Angle hole pattern is simple and flexible.

the Right Angle. An extended line marks the
3" increments (vertical slots), while shorter lines
mark every ¾" increment. With this hole pattern,
nesting, triangulation, cross beams and many
additional combinations are possible.
Cleat sections
Cut Off Cleats are small sections of Right Angle
used to reinforce joints or used as feet to support
vertical columns. These feet prevent damage
to floor surfaces or can be used to bolt a structure
to the floor. Additional joints can be made using
cut off cleats. Simply butt the cleat against a
column and behind a right side beam, as shown in
the illustration.
—
Right angle slotted angle systems
Nuts serrated, gusset plate, portable cutter & nylon bushing
Cleat
Triangulation
Cross beams
Nesting
Cleat
Cleat