Product Brochure
98
KINDORF® METAL FRAMING SYSTEM METAL FRAMING CHANNEL & ACCESSORIES
Chemical
Polyester Vinylester Rigid PVC Polyurethane
70°F 160°F 70°F 160°F 70°F 160°F 70°F 160°F
Hydroflouric acid,
<20%
† †
•
100°
•
† – –
Hydrogen chloride,
wet gas
•
†
• •
– – – –
Hydrogen sulfide,
wet gas
•
†
• • • •
– –
Lactic acid
•
†
• • • • •
–
Nickel sulfate, low pH † †
• •
– – – –
Nickel sulfate, high pH † †
• •
– – – –
Nitric acid, <35% † †
•
120°
• • •
—
Perchloric acid, <10% † †
•
150° – – – –
Phosphoric acid
• • • • • • •
—
Potassium chloride
• • • • • • •
—
Potassium nitrate
• • • •
– – – –
Potassium persulfate † †
• •
– – – –
Sodium hydroxide,
<50%
† †
•
180°
• • •
–
Sodium hypochlorite,
<15%
† †
•
150°
• • •
–
Sodium nitrate
• • • •
– – – –
Sodium sulfate
•
†
• •
– – – –
Sodium sulfide † †
• • • • •
–
Sulfuric acid, <70% † †
• • • • •
–
Sulfuric acid >70% † †
•
102° † † – –
Trisodium phosphate † †
• • • • •
–
Urea
•
†
•
150° – – – –
Vegetable oils
• • • •
– – – –
Vinegar
• • • •
– – – –
White Liquor – –
• • • • •
–
NOTE: The guidelines presented in this table assume the typical application of Kindorf®
products where exposure is limited to fumes, vapors, and occasional splashes from chemicals.
This information is intended as a guideline and does not guarantee product performance
factory should be consulted. Some applications may require a screening test of samples in
the chemical environment of interest. The user is advised to determine suitability of the
Cat. No. Description Size
Weight
(lbs/100)
NH-601 Spray-on sealant 12 oz 100
Kindorf® Spray-On Fiberglass End Sealant provides a quick and easy corrosion-resistant
coating when applied to fiberglass channel and accessories. Kindorf® Spray-On Fiberglass
End Sealant is a rubberized spray which is supplied in a 12 oz. pressurized can.
Cat. No. Description Size
Weight
(lbs/100)
NH-600 Brush-on sealant 1 qt. 220
When fabricating Type “P” or “V” Series materials, Kindorf® Fiberglass End Sealant should
be used. After cutting or drilling the channel, interior glass fibers may fray and lose strength
due to exposure to the environment. Kindorf® sealant protects the exposed glass fibers and
prevents deterioration. Kindorf® sealant exceeds Vinylester (V) material in corrosion resistance.
Chemical
Polyester Vinylester Rigid PVC Polyurethane
70°F 160°F 70°F 160°F 70°F 160°F 70°F 160°F
Acetic acid, <50%
• • • •
† †
•
–
Acetone, <10% † † † † – – – –
Aluminum hydroxide
• • • •
– – – –
Ammonium
hydroxide, <20%
† †
•
150°
• • •
–
Ammonium nitrate
• • • •
– – – –
Ammonium
phosphate
• • • •
– – – –
Benzene
• •
† † – – – –
Benzoic Acid
• • • •
• • • –
Bromine, Wet Gas † †
•
100° • † – –
Butylene Glycol
• • • •
– – – –
Butyric Acid, <50%
• • • •
– – – –
Chlorine, Dry Gas
• • • •
– – – –
Chlorine, Wet Gas † †
• •
– – – –
Chlorine, Liquid † † † † – – – –
Chlorine, Water
• • • • • • •
–
Chromic Acid, <5% † † • • – – – –
Copper Chloride
• • • • • • •
–
Copper Cyanide
• • • • • • •
–
Copper Nitrate
• • • •
– – – –
Copper Sulfate
• • • • • • •
–
Esters, Fatty Acids
• • • •
– – – –
Ferric Chloride
• • • • • •
– –
Ferrous Chloride
• • • •
– – – –
Fluoboric Acid
•
120°
• • • • •
–
Fluosilicic Acid, <32% † †
•
100° – – – –
Formic Acid, <50% † †
•
100° † †
•
–
Gasoline, aviation
•
†
• •
– – – –
Hydrochloric acid,
<37%
•
†
• • • • •
–
Key: • Recommended for use / Recommended up to temperature indicated /
† Not recommended for use / – No information available at this time
—
Non-metallic channel and accessories
Kindorf
®
Brush-on & spray-on fiberglass end sealant
—
Kindorf® Brush-on fiberglass end sealant
—
Kindorf® Spray-on fiberglass end sealant
—