User's Manual

0~5mm
4.Back light status instructions
or or
Warm prompts: This function is for reference only.
Introduction of Measurement methods
Please pull ears
of your kid who is within
one year old.
back
Ear temperature
Please pull these persons'
ears back above.(over one
year old kids and adults)
Ear temperature
The center of forehead
Forehead temperature
When measured temperature is ＜ 34 , it shows LO with
backlight.
°C
red
When measured temperature value is ≥ 34 , ＜ 37.2 , it
means normal body temperature and shows green backlight.
°C °C
When measured temperature value is ≥37.2 , ＜ 38.2 , it
means that you have a bit of fever and shows orange backlight.
°C °C
When measured temperature value is ≥ 38.2 , ≤ 43.0 ,
means that you are in fever stage and shows red backlight.
°C °C
it
When measured temperature value is ＞ 43.0 , it shows red
backlight and shows HI.
°C
08
07
Basic parameter instructions
1.Sound function: turn on/off
1) In the power-on state, press “mem” key to set the sound on
or off.
2) Press “mem” button, LCD screen will show“ ” it means the
sound works, meanwhile we will hear a short beep sound.
3) Press “mem” button again, “ ”will change into, “ ”it means
the sound will be off.
2.The switch of or °C°F
°F
°C
In off status , long press “mem” button for six seconds, it
switch between Fahrenheit degree ( )and Celsius
( ). Wait for 8 seconds to turn on the product
or press “ ” to turn off the product directly.
can
degree
automatically
The screen display marks description
Memory
storage
Power mark
Ear temperature
measurement
Temperature
unit (℉ or ℃ )
Forehead temperature
testing
Objects measurement
Sound symbols
Measurement
result display
Battery installation explanation
Remove the battery
cover under pressure
Battery installation flow:
1. Press battery cover, the battery cover will bounce
automatically.
2. Prepare two pieces of battery with the module of 1.5V AAA
( number seven battery) batteries (It is recommended to
use alkaline batteries), please install it into base of battery
according to correct positive and negative poles.
Insufficient power caution:
when battery voltage is lack, LCD shows“ ”
sign and battery mark is always on, which
means you should replace the battery.
Warm prompts
If you do not use this product for a long time, please take out
battery to assure its longevity. The liquid leakage of battery
will harm the product; as well as pollute our environment.
It is recommended to use alkaline batteries.
The way to handle scrapped battery should match
the requirements of local country government and
environmental protection organ.
Use your finger to press down
hard on the endpiece of battery
"-" for ejecting the battery.
shows). It will turn off automatically without operating for 30
seconds or press“ ”button to turn off this product with your
hands.
3.Memory storage function
In off status, press “mem” button, the product can read and
save 9 sets of measurement values in order (as below picture