User's Manual

Product Management – External Tool Tag - User Manual (US/CA)
SPECIFICATIONS– 8
2.3.2
Tag LED
Please mind that tag LED behavior depends on the firmware use case one has selected. Most important versions
are:
Power-on Reset
Color Duration Explanation
yellow Constant, ~1s Standstill (sleep) mode - The LED is blinking every 30 seconds for
approximately 1s.
yellow Constant, ~1s Active mode (X-Tag in movement) - The LED is blinking every 1 secondfor
approximately 1s.
yellow Constant, duration
depends on firmware
size
Tag is being bootloaded with new firmware
2.3.3
Electrical Parameters
Interface Parameter
[ Unit]
Min Typical Max Comment
Power supply Input Voltage [V] 3 V
Input Current [mA] 250 mA UWB receive
2.4 Battery
A Lithium Polymer re-chargeable battery is used
Type CR34615
Nominal Voltage 3.0V
Capacity 12000 mAh
Operating temperature discharge -40°C to +85°C
Size 61.5mm x 34mm x 34mm