User's Manual

9
SPECIFICATIONS
•
•
•
•
Interface Parameter
[ Unit]
Min Typical Max Comment
Input Current [mA] 250 mA UWB receive
3.4 Battery
A Lithium Polymer re-chargeable battery is used
Type CP502440
Nominal Voltage 3.0V
Capacity 1200 mAh
Operating temperature discharge -20°C to +60°C
Size 40.5mm x 24.5mm x 5.2mm
3.5 Accessories
3.6 Mounting options
X-Tag does not have separate mounting bracket and it is directly attached to the objects via the following ways:
Zip tie
Velcro tape
Double-sided tape
Self-trapping screws
3.7 Regulatory and Legal Information
The Kinexon X-Tag has been designed to be in compliance with both the U.S. FCC Part 15 subpart F regulations,
section 15.250 and with the European Union ETSI EN 302 065 standards. Two different versions of the Kinexon
X-Tag are available, one version supports the FCC emissions mask (Region 1) and the second supports the ETSI
standard mask (Region 2).
3.8 Disclaimer
The information in this document is subject to change without notice. Kinexon GmbH assumes no responsibility for
inaccuracies or omissions and specifically disclaims any liabilities, losses, or risks, personal or otherwise, incurred
as a consequence, directly or indirectly, of the use or application of any of the contents of this document. For the
latest documentation, contact Kinexon GmbH.