H series HT series HM series HME series HL series HLE series In-wall, fan-driven, zone-controlled heat. Hydronic Heats efficiently using energy from typical hot water source.
Hydronic. Comfort everywhere. Heat only the rooms which need it, borrowing energy from what’s already there: the hot water heater. H Compatible with typical hot water sources Reduce utility bills with individual room control Built well with high quality components Hydronic wall-mount unit for bedroom and bathroom applications.
How does King’s hydronic system work? The concept is simple: Redirect existing hot water rather than expend energy to create a new heat source. King’s hydronic heating system uses hot water from your hot water tank (any hot water source — gas, electric, solar, etc.), passes it through highly efficient radiant heat plates, and returns the hot water to your tank.
Hydronic. Comfort everywhere. OPEN LOOP Hydronic System 140º – 160º Hot Water Source Water heater, tankless water heater or boiler. check valve < — Domestic Cold Water Circulation Pump Tempering Valve 120° 120v power to pump 120v power to fan on one minute delay To Domestic Hot Water 120° check valve > Hot Water — expansion tank < — Return Water > Hot Water — < — Return Water This drawing is a general diagram and was simplified for clarity.
CLOSED LOOP Hydronic System <— Domestic Cold Water expansion tank <— Domestic Hot Water check valve Water heater, tankless water heater or boiler. (isolated from potable water) 140º – 160º Hot Water Source < — Domestic Cold Water check valve Tempering Valve 120° Circulation Pump This drawing is a general diagram and was simplified for clarity. Other components like ball valves, check, bleed zone valves, pressure gauges or temperature wells may be required in the system to operate properly.
Hydronic. Comfort Comfort everywhere. everywhere. All King hydronic heaters are tested to UL 1995 standards. Approved for USA and Canada CSA /C22.2 Hydronic Small H 1800 to 10,500 Btu Model Number Volts Can Size Grille Size H412 – all versions 120 9½"h x 14 3/8"w x 4¾"d 10½"h x 15¾"w x 7/8"d H612 – all versions 120 11"h x 14 3/8"w x 4 ¾"d 12 ½"h x 15 ¾"x 7/8"d MODEL H412 2/3 H412 3/4 H612 4/5 H612 6/8 FINS PER INCH FT.
Hydronic Medium and Hydronic Medium with ECM HM HME Model Number Volts Can Size Grille Size HM & HME 812 & 1012 – all versions 120 21¾"h x 14 ¼"w x 4¾"d 23¼"h x 15½"w x ¾"d 4960 to 18,700 Btu Unit Bearing Motor FT. OF WATER PRESSURE DROP @ 2 GPM 120ºF 48ºC 140ºF* 60ºC 160ºF* 71ºC 180ºF 82ºC Motor Hi/Lo CFM Decibles at 3-ft distance Hi/Lo: Amps Hi/Lo: Watts HM812 6/9 .
Hydronic. Comfort everywhere. All King hydronic heaters are tested to UL 1995 standards. Approved for USA and Canada. CSA /C22.2 King: Made to last. At King, we take great pride in standing behind our products, inside and out. We go beyond certification requirements, and execute a build quality we can be personally proud of. When you purchase King, you’re buying peace-of-mind, knowing you’re dealing with a strong U.S.A. manufacturer serving the trades and consumers for over fifty years.