Installation Manual

Thermostat display will
be flashing on initial start
up.
Tap one arrow key to
stop the flashing.
Set today’s Day :
Touch the
CLOCK
button,
the day will flash, press the
arrow key to set today’s
day.
To View the preset program
1. Pre
ss the PROG Button to view the P1 temperature or Program
1 setting for that day.
push the
PROG
Button again you will see presets for P2,P3,P4.
2. T
o advance day:
Tap ARROW Key, All the days are set the same and ready for
your adjustment .
To make Program adjustments
:
3
. Press
the SET Button and the PROG Button at the same time
.
This puts it into
Program mode and the days will be flashing,
Tap the arrow keys to select all seven days or one day at a time to
program.
Tap the PROG key to highlight the time.
Tap the ARROW keys to adjust,
Tap the PROG key again to set the temperature for that time,
Repeat these Steps for all Presets, P1,P2,P3,P4.
When you reach P1 again:
Tap the ARROW key to change the Day and repeat Programming.
If all days are the same for that temperature select all seven days
for that P Number.
Number 1
View Presets
Number 3
Changing Pre-
To vacation hold a temperature for a preset number of days.
1. Pre
ss
HOLD
button
.
2. Ta
p
ARROW
Keys to set temperat
ure.
3. Pre
ss the HOLD button until d:01displays in the time window
.
4. Ta
p the ARROW keys until the number of days desired is
achie
ved. Up to 99 day hold can be achieved
.
To
stop hold function
Push SET button and normal program is resumed.
To Permanently hold Temperature
Press HOLD button
Tap ARROW Keys to set temperature.
To resume program and stop hold function
Push SET button.
Days of hold
Permanent Hold
HWP Programming instructions
To set today’s time:
Touch the
CLOCK
button and
the hour will flash. Use Arrow
keys to set hour. Touch
CLOCK
button again to set minute with
arrow keys.
To Exit press
SET
button.
3
King Electrical Mfg. Co. 9131 10th Ave. So.
Seattl
e, WA 98108
Phone: [phone] Fax: [phone]