Use and Care Manual

Protect your equipment from destructive freezing by install-
ing this unit where protective warmth is required. This versatile utility
heater will save you time and money by preventing the costly inconve-
nience of frozen pipes and equipment in your pump room, valve room,
utility room, etc. With the automatic thermostat you set the required
temperature to be maintained. Low wattage units can be used in electri-
cal cabinets for moisture control and to maintain a minimum operating
temperature to provide high reliability of electronic equipment.
UTILITY HEATER
FEATURES
• Thermostat has range of 40º to 90ºF
• Steel sheath long life element
• Expanded metal element shield
• 4 mounting feet
• Capillary tube safety high limit
• Steel case and grille
• Optional stainless steel case and grille
• Baked enamel ivory finish
• ½" knockout for electrical hookup
• 1-year warranty
9131 10th Avenue South, Seattle WA 98108 [phone] fax [phone]
electrical mfg. company
Clearances from combustible surfaces
Low Wattage Clearances from combustible surfaces - for 62 Watts to 187 Watts
Maximum wattage for vertical installation is 250 Watts. Do not exceed 250 Watts with this installation.
VERTICAL
ON WALL
(Thermostat Up)
DO NOT INSTALL THIS WAY
* cubic foot cabinet
** 240 Volt unit run at 120 Volts
U.indd : 1/10
WATTAGE
Model for
120V
Model for
240V
ROOM SIZE
(cubic feet)
62 U2425** N/A 5*
125 U2450** N/A 10*
187 U2475** N/A 15*
250 U24100** U2425 20
500 U1250 U2450 38
750 U1275 U2475 50
1000 U12100 U24100 75