Instructions / Assembly


ALL

FREQUENTLY ASKED QUESTIONS AND ANSWERS
1. What is the problem if the cooker takes too long or will not heat oil or cooking ingredients to desired
 temperature?Mycooker’sameappearanceisveryweak.
 Answer:IfthehoseassemblyhasaType1Connection(black/greenknob),itisequippedwithaowlimiting
device.Thisdeviceisintendedtolimittheowofgasshouldtherebealeakbetweentheregulatorandtheappliance.
Toachieveapositivegasseal,whichwillallowformaximumgasow,themanualvalvemustbesettoa
completely OFF position before the cylinder valve is opened. A good tip to remember is “Tank Is First On, Last Off.”
The Problem Can Be Remedied in Two Ways:
A. 1. Turn the manual valve to the OFF position. Close the tank valve completely by turning it clockwise
until it stops.
2. Check that the Type 1 Connection (black/green knob) is completely tightened to the tank valve.
 3. Wait5secondsforthepressuretoequalizeandfortheowlimitingdevicetoreset.
4. Turn tank valve ON (counterclockwise.)
5. Turn the manual valve to an ON position.
 6. Relightcookerfollowingalllightinginstructionscontainedinthismanual.Checkforproperame
characteristics.
OR
B. 1. Turn the manual valve to the OFF position. Close the tank valve completely by turning it clockwise
until it stops.
 2. RemoveType1Connection(black/greenknob)fromthetankvalve.Theowlimitingdevicewillnow
reset.
3. Re-attach Type 1 Connection (black/green knob) to the tank valve. Tighten completely.
4. Turn tank valve ON (counterclockwise.)
5. Turn the manual valve to an ON position.
 6. Relightcookerfollowingalllightinginstructionscontainedinthismanual.Checkforproperame
characteristics.
2. How long will the propane in my tank last?
Answer: On average, a full tank will give you approximately 15 hours of normal cooking.
3. Ihaveanewstyletankanditwon’tconnecttomyregulator.WhatdoIdo?
Answer: The regulator supplied with this appliance has a Type 1 Connection which will attach to the tank valve
which has large threads on the valve outlet. These connect into the large plastic handnut (black or green). This tank will
also connect to earlier models of Metal Fusion cooker regulators which had a brass plug connector with left hand
threads, which will connect to the internal threads of the Type 1 tank valve (with a wrench). If your tank has a quick
disconnect valve (plug in type) our regulators can not connect to this tank.
4. IhaveabrandnewcookerandIcannotgettheburnertolight.What’stheproblem?
 Answer:Makesurethetankhasbeenlledwithpropane.Tankspurchasedfromthestoreshelfaremostoften
sold empty. If this does not solve the problem refer to Maintenance Instruction items #3 and #4, page 15. If you have
questions please call Metal Fusion, Inc. at [phone].
IF YOU HAVE A QUESTION WE HAVE NOT ADDRESSED IN THIS MANUAL
PLEASE SEND US AN E-MAIL AT [e-mail] OR CALL 1-800-783-3885
BETWEEN 7:30 A.M. AND 3:30 P.M. CST MONDAY THROUGH FRIDAY.
22