Instructions / Assembly

13
ASSEMBLY INSTRUCTIONS FOR BOLT TOGETHER WORK TABLE -
MODEL # T30CABKD AND TSS30CABKD
ASSEMBLY INSTRUCTIONS FOR BOLT TOGETHER COOKER
1) Assemble the two bolts, nuts, and washers in table top/curved flat bar connection piece, wrench
tighten.
2) Assemble the work table to the cooker with the bolt, nut, and washer from one of the top ring/leg
connections through the curved flat bar connection piece and wrench tighten (see above picture.)
CONTENTS
(2) Rings
(3) Legs
(1) Shroud
(1) Casting/Air Shutter
(1) Hose/Regulator with Timer
(1) Heat Plate
(12) Bolts, Lockwashers and Nuts
TOOLS NEEDED
Adjustable Wrench
Screwdriver
1) Assemble bolts, washers and nuts as per diagram.
2) Wrench tighten. Make sure all bolt sets are used
and unit stands sturdily.
3) Go to pg. 11 for casting installation instructions.
Legs bolt to outside of top and bottom rings
(6 bolts, lockwashers and nuts)
Legs bolt to inside of shroud (6 bolts, nuts,
and lockwashers)
1
2
Nut
Lock Washer
Bolt
* Model May Vary From Picture
CONTENTS
(1) Work Table
(1) Curved Flat Bar Connection Piece
(2) Bolts, Lockwashers and Nuts
TOOLS NEEDED
Adjustable Wrench
Screwdriver
Work Table
Curved Flat Bar
Connection Piece