Instructions / Assembly

14
MODEL # 2866 & 2966
FRY BASKET ASSEMBLY INSTRUCTIONS
TOOLS REQUIRED: Screwdriver
Parts List:
Fry Basket with Mounting Plates (1)
Long Handle (1)
Short Handle (1)
Bolts (8)
Assembly:
1) Locate side of basket with attached clip for attaching basket to side of pot. Locate the
“long” handle. Align the four holes on the handle to four holes on the mounting plate of
basket. Attach using four bolts.
2) Locate “short” handle . On opposite side of basket from “long” handle, attach “short”
handle to basket using same method as above.
3) Go to the Use and Care section of this manual for further instructions.
FRY BASKET HANDLE ASSEMBLY
Required Tools: Adjustable Wrench and Screwdriver
1. Attach handle by inserting bolts (round head to inside
of pan) into holes indicated in black. Also insert bolt
(round head to inside of pan) into hole indicated with
an “X”. Apply nuts and tighten. (This bolt helps hold the
basket away from pot when hooking it on the side of
the pot to drain oil from food.)
2. Some models of baskets have a 4 bolt “square”
design for assembly. Attach handle by inserting
bolts through supplied holes on basket and handle
(round head of bolt to inside of pan). Apply nuts and
tighten.
Insert Bolts in marks as instructed
* Model may vary from picture.