Instructions / Assembly

MODEL# 2835 AND 2836

POT AND ACCESSORIES ASSEMBLY INSTRUCTIONS

READ AND UNDERSTAND ALL WARNINGS AND

INSTRUCTIONS BEFORE USING THIS PRODUCT!

OVERVIEW:

I. Parts List

II. Assembly of Basket

A. Assembly of Basket with Adjustable Lifting Hooks for Turkey Frying

B. Assembly of Basket for Steaming

C. Assembly of Basket with Long Handle (Model #2836 only)

I. Parts List

(1) Cooker Frame (1) Two Handed Lifter

(1) Casting/Air Shutter (1) Basket

(1) Hose and Regulator with Timer (2) Adjustable Lifting Hooks

(1) Deep Fry Thermometer (8) Bolts

(1) Aluminum Pot with Lid (8) Wing Nuts

(1) Heat Plate (1) Steamer Support

(1) Long Handle with 3 Small Bolts/Nuts (Model #2836 only)

II. Assembly of Basket

The basket supplied with this appliance provides you with a wide array of cooking options. Please

read and understand the following instructions for correct assembly of basket and accessories.

A. Assembly of Basket with Adjustable Lifting Hooks for Turkey Frying

1. Attach the two adjustable lifting hooks to each end of the basket by aligning the four

“square” holes on each lifting hook to the top four “square” holes indicated with an

“*” in Figure 1 below. Place the hooks on the inside of the basket making sure both

adjustable lifting hooks are installed facing the same direction for correct use with two

handed lifter.

2. Insert supplied bolts from the outside of basket so that they protrude into inside of basket.

Tighten with supplied wing nuts. See below Figure 2 for picture of correct assembly.

IMPORTANT: The above steps must be followed correctly to provide clearance above the

cooking liquid to properly and safely insert and remove the basket with the two handed lifter.

Figure 1

Figure 2