User's Manual

OPERATIONAL SAFETY continued...
 Never allow the tilling tines to contact such items. Never assume an area is
clear. Always Check!
 Always stop the tractor, disengage PTO, set brake, shut off the tractor engine,
remove the ignition key, lower implement to the ground and allow rotating pieces
to come to a complete stop before dismounting tractor. Never leave equipment
unattended with the tractor running.
 Never place hands or feet under tiller with tractor engine running or before you
are sure all motion has stopped. Stay clear of all moving parts.
 Do not reach or place any part of your body under equipment until it is blocked
securely.
 Do not allow riders on the rotary tiller or tractor at anytime. There is no safe
place for any riders.
 Do not operate unless all personnel, livestock, and pets are several hundred
feet away to prevent injury by thrown objects.
 Never operate tractor and rotary tiller under trees with low hanging limbs. Op-
erators can be knocked off the tractor and then run over by the rotating tines.
 The rotating parts of this machine have been designed and tested for rugged
use. However, they could fail upon impact with heavy, solid objects such as steel
guardrails and concrete abutment. Such impact could cause the broken objects
to be thrown outward at very high velocities. To reduce the possibility of property
damage, serious injury, or even death, never allow the tilling tines to contact
such obstacles.
 Stop rotary tiller and tractor immediately upon striking an obstruction. Turn en-
gine off, remove key, inspect and repair any damage before resuming operation.
 Stay alert for uneven terrain, holes, rocks, and roots and other hidden hazards.
Keep away from drop-offs and hazards that could cause roll over. Use extreme
care and maintain minimum ground speed when transporting or operating on
hillsides, over rough ground and when operating close to ditches or fences. Be
careful and slow down when turning sharp corners and changing direction on
slopes. Do not start or stop suddenly on slopes. Avoid operation on steep
slopes. In extremely uneven terrain, rear wheels weights, front tractor weight,
and/or tire ballast should be used to improve stability.
14