User's Manual

12
Attaching the fan blades
10
Ƒ Attach a blade (F) to the fan motor housing (E) by inserting
the blade (F) into slots in the side of the fan motor housing
(E) and aligning the four screw holes in the blade with the
holes in the center ywheel and secure with screws (AA).
Ƒ Make sure all the screws are rmly tightened.
E
AA
F
Assembly - Hanging the Fan (continued)
9
Mounting the WINK antenna
Ƒ Before adhering the antenna to the ceiling, make sure the
section of ceiling is clean and free of dirt or dust.
Ƒ Remove the protective strip from the double-stick tape on
the T-shaped antenna and stick the antenna to the ceiling.
Ƒ Secure the antenna to the ceiling by inserting the wood
screw (XX) into the hole of the antenna and screwing into
the ceiling.
XX