User's Manual

HAMPTONBAY.COM

Please contact 1-877-527-0313 for further assistance.

Operation

Your fan is equipped with a remote control to operate the speed

and lights of your new ceiling fan, and controls the fan as follows:

Light/Dimmer button = Light on/off and Dimmer

Low button = Low speed

Medium button = Medium speed

High button = High speed

Fan off button = Power off

Reverse button = Fan reversing function

The appropriate speed settings for warm or cool weather depend

on factors such as the room size, ceiling height, and number of

fans.

Warm weather - (Forward) A downward airow creates a cooling

effect. This allows you to set your air conditioner on a warmer

setting without affecting your comfort.

Cool weather - (Reverse) An upward airow moves warm air off

of the ceiling. This allows you to set your heating unit on a cooler

setting without affecting your comfort.

NOTE: Do not wait for the fan to stop before pressing the reverse

button. The fan will not reverse direction if the fan is not moving.

Assembly - Installing the Light Bulbs and Glass Bowl

Installing the light bulbs and glass

bowl

Ƒ With the power off, install the light bulbs (G) (Max. 40W,

provided) into the light bulb sockets.

Ƒ Place the glass bowl (D) into the light kit tter assembly (C),

aligning the three at areas on the top ange of the glass

bowl (D) with the three raised dimples in the light kit tter

assembly (C). Turn the glass bowl (D) clockwise until it stops.

WARNING: Do not overtighten when installing the glass

bowl into the light kit assembly. Allow the glass bowl to cool

completely before removing.

REMOTE CONTROL OPERATING INSTRUCTIONS