52” Minorca Ceiling Fan by Hampton Bay Dual-Mount Installation Aero-Breeze™ Technology Moves up to 25% More Air 3-Speed Reverse Function for Year-Round Comfort and Savings Handheld Remote Control Thank you for purchasing this Hampton Bay ceiling fan. This product has been manufactured with the highest standards of safety and quality. The finish of this fan is weather resistant, but over time will naturally weather and fade. Table of Contents Safety Rules................................................
READ AND SAVE THESE INSTRUCTIONS 1. To reduce the risk of electric shock, insure electricity 2. 3. 4. 5. has been turned off at the circuit breaker or fuse box before beginning. All wiring must be in accordance with the National Electrical Code ANSI/NFPA 70-1999 and local electrical codes. Electrical installation should be performed by a qualified licensed electrician. WARNING: To reduce the risk of fire or electric shock, do not use this fan with any solid-state speed control device.
1 4 7 8 9 2 a 10 5 3 c 6 11 (2PCS) (4PCS) Unpack your fan and check the contents. You should have the following items: 1. 2. 3. 4. 5. 6. b Mounting Plate (inside canopy) Ball/Downrod Assembly Canopy Fan Motor Assembly Light Kit with finial pre-attached Decorative Glass Housing 7. Blades (5) 8. Blade Bracket Set (5) 9. Glass Bowl 10. Hand unit/Receiver (Battery included) 11. Bulbs (6) IMPORTANT: THIS PRODUCT AND/OR COMPONENTS ARE COVERED BY ONE OR MORE OF THE FOLLOWING U.S.
Tools Required Phillips screw driver, straight slot screw driver, adjustable wrench, step ladder, and wire cutters. Figures 1, 2, and 3 are examples of different ways to mount the outlet box. Mounting Options Figure 3 If there isn’t an existing outlet box, then read the following instructions. Disconnect the power by removing fuses or turning off circuit breakers. Secure the outlet box directly to the building structure. Use appropriate fasteners and building materials.
Attaching the Fan Blades the center flywheel and secure with screws supplied (Figure 6). Screws Cut-Out In The Top Light Kit Plate NOTE: Your fan blade are reversible. Select the blade side finish which best accentuates your decor. 1. Attach blade to blade bracket using the screws supplied (Figure 5). Start a screw into the bracket. Repeat for the two remaining screws. Turn Canopy Ring To Remove Center Flywheel Screws Blade Hole For Blade Bracket Insert Blade/Blade Bracket Assembly Figure 6 5.
3. Route the wires exiting the top of the fan motor through the decorative glass housing. Then route the wires through the canopy ring and then the canopy. Continue by routing the wires through the ball/downrod assembly (Figure 9).
Installing Fan to the Outlet Box WHEN MOUNTING THE FAN ON A SLOPED CEILING, THE STANDARD BALL/DOWNROD MOUNTING METHOD MUST BE USED. MAKE SURE THE MOUNTING BRACKET SLOTS ARE ON THE LOWER SIDE BY SLIDING THE MOUNTING BRACKET FROM THE TOP DOWN. 1. Pass the 120-volt supply wires through the center hole in the ceiling mounting bracket as shown in Figure 9. 2. Install the ceiling mounting plate on the outlet box, sliding the mounting plate over the two screws provided with the outlet box (Figure 9).
Finishing the Fan Installation Outlet Box RED WHITE WHITE BLACK SUPPLY CIRCUIT BLUE Grounding Green Lead BLUE WHITE WHITE BLACK BLACK 1. Align the four screw holes in the canopy with the four screw holes in the mounting plate. 5. Remove the finial, hex nut and rubber washer on the bottom of the light kit assembly. 3. You may now proceed to install the decorative support rods. OVER LAMPING THE FAN WILL RESULT IN THE FAN LIGHTS SHUTTING DOWN UNTIL THE PROPER WATTAGE OF BULBS ARE INSTALLED.
Blade Balancing Light Kit Bracket Blue Black Light Kit Switch Cup Glass Shade White White Mounting Screws Sockets Bulbs Rubber Washer Hex Nut Finial Figure 12 All blades are grouped by weight. Because natural woods vary in density, the fan may wobble even though the blades are weight matched. The following procedure should correct most fan wobble. Check after each step. 1. Check that all blade and blade bracket screws are secure. 2. Most fan wobble problems are caused when blade levels are unequal.
Remote Control - Your fan is equipped with a remote control to operate the speed and lights of your new ceiling fan. For more information on how to install the remote control, see the remote control instruction along with the remote control components. Speed settings for warm or cool weather depend on factor such as the room size, ceiling height, number of fans and so on. Warm weather - (Forward) A downward air flow creates a cooling effect as shown in Figure 14.
Setting the Code This unit has 16 different code combinations. To set the code, perform the following steps: A. Setting the code on the transmitter: a. Remove the battery cover. Press firmly below arrow and slide battery cover off. b. Slide code switches to your choice of up or down position. (Factory setting is all up). B. Setting the code on the receiver. a. Slide code switches to the same position as set on your transmitter. b. Replace battery cover on transmitter. Installing Receiver A.
Care of Your Fan Here are some suggestions to help you maintain your fan. 1. Because of the fan’s natural movement, some connections may become loose. Check the support connections, brackets, and blade attachments twice a year. Make sure they are secure. (It is not necessary to remove fan from ceiling.) 2. Clean your fan periodically to help maintain its new appearance over the years. Do not use water when cleaning, this could damage the motor, or the wood or possibly cause an electrical shock.
FAN SIZE SPEED 52” VOLTS AMPS WATTS RPM CFM Low 120 0.32 15 60 2387 Med 120 0.41 29 98 3911 High 120 0.49 56 150 5873 NET WEIGHT GROSS WEIGHT CUBE FEET 23.3 Lbs 26.4 Lbs 1.93 These are approximate measures. They do not include Amps and Wattage used by the light kit. Distributed by Your Other Warehouse LLC 12100 Little Cayman Dr.
Hampton Bay Lifetime Limited Warranty Lifetime Warranty on Motor Hampton Bay warrants the fan motor to be free from defects in workmanship and material present at time of shipment from the factory for a lifetime after the date of purchase by the original purchaser.
Minorca de 52" Ventilador de techo de Hampton Bay Instalación de montaje doble La tecnología Aero-Breeze™ mueve un 25% más de aire Función de reversa de 3 velocidades para confort y ahorro durante todo el año Control remoto portátil Gracias por comprar este ventilador de techo de Hampton Bay. Este producto se ha fabricado con las normas de seguridad y calidad más altas. El acabado de este ventilador es resistente a la intemperie, pero con el tiempo, exhibirá un desgaste y decoloración naturales.
LEE LAS INSTRUCCIONES Y GUÁRDALAS 1. Para disminuir el riesgo de descarga eléctrica, asegúrate 2. 3. 4. 5. de que la electricidad ha sido apagada en el cortacircuitos o la caja de fusibles antes de comenzar la instalación. Todo el cableado debe cumplir con el Código Nacional de Electricidad ANSI/NFPA 70-1999 y con los códigos locales de electricidad. La instalación eléctrica debe ser hecha por un electricista certificado y calificado.
1 4 8 9 2 5 3 7 a 10 c 6 11 (2) (4) Desempaca tu ventilador y revisa el contenido. Deberá tener las siguientes piezas: 1. 2. 3. 4. 5. 6. b Placa de montaje (dentro de la cubierta) Ensamblado de tubo bajante/bola Cubierta Ensamblado del motor del ventilador Kit de luces con remate instalado Carcasa de vidrio decorativa 7. Aspas (5) 8. Juego de soportes del aspa (5) 9. Tazón de vidrio 10. Unidad de mano/Receptor (batería incluida) 11.
Herramientas necesarias Las figuras 1, 2 y 3 son ejemplos de diferentes formas de montar la caja eléctrica. Destornillador Phillips, destornillador plano, llave ajustable, escalera de tijera y cortacables. Placa de montaje en el techo Caja eléctrica empotrada Opciones de montaje Figura 3 Si no hay una caja eléctrica existente, entonces lee las siguientes instrucciones. Desconecta la energía retirando los fusibles o apagando los cortacircuitos.
Cómo montar las aspas del ventilador Tornillos NOTA: Las aspas de tu ventilador son reversibles. Elige el acabado del aspa que mejor resalte tu decoración. 1. Fija el aspa a su soporte con los tornillos provistos (Figura 5). Inserta el tornillo en el soporte. Repite para los otros dos tornillos. Aspa Ensamblado de aspa/soporte de aspa Cómo colgar el ventilador Soporte de aspa Figura 5 2. Aprieta todos los tornillos de manera firme. 3.
3. Inserta los cables que salen por la parte superior del motor del ventilador a través de la carcasa de vidrio decorativa. Después pasa los cables a través del anillo y la cubierta. Luego pásalos a través del ensamblado de tubo bajante y bola (Figura 9). 4. Afloja, sin quitarlos, los tornillos en el collarín ubicado en la parte superior de la carcasa de motor.
Cómo instalar el ventilador en la caja eléctrica CUANDO MONTES EL VENTILADOR EN UN TECHO INCLINADO, DEBES USAR EL MÉTODO DE MONTAJE CON TUBO BAJANTE Y BOLA ESTÁNDAR. ASEGÚRATE DE QUE LAS RANURAS DEL SOPORTE DE MONTAJE ESTÉN EN EL LADO INFERIOR DESLIZANDO EL SOPORTE DE MONTAJE DESDE ARRIBA HACIA ABAJO. 1. Pasa los cables de suministro de 120 voltios a través del orificio central en el soporte de montaje de techo como lo muestra la Figura 9. 2.
NEGRO Caja eléctrica ROJO BLANCO BLANCO CIRCUITO DE SUMINISTRO AZUL Cable terminal a tierra verde AZUL NEGRO NEGRO BLANCO BLANCO Receptor Tierra al tubo bajante 7. AZUL BLANCO NEGRO BLANCO Finalizar la instalación del ventilador 1. Alinea los cuatro orificios de tornillo en la cubierta con los orificios correspondientes en la placa de montaje. 2. Asegura la cubierta en su lugar con los cuatro tornillos de montaje retirados en el paso 2 tal como se describe en la página 4. 3.
Equilibrar las aspas Soporte del kit de luces Azul Negro Caja del interruptor del kit de luces Pantalla de vidrio Blanco Blanco Tornillos de montaje Portabombillas Bombillas Arandela de goma Tuerca hexagonal Remate Figura 12 Todas las aspas se agrupan por peso. Como las maderas naturales varían en densidad, el ventilador puede oscilar aunque las aspas tengan el mismo peso. El siguiente procedimiento corregirá en gran medida la oscilación del ventilador. Verifica después de cada paso. 1.
Control remoto - Tu ventilador está equipado con un control remoto que controla la velocidad y las luces de tu ventilador de techo. Para más información sobre cómo instalar el control remoto, consulta las instrucciones del control remoto y revisa los componentes incluidos con éste. Las configuraciones de velocidad para clima cálido o frío dependen de factores como tamaño de la habitación, altura del techo, cantidad de ventiladores y demás.
Cómo configurar el código Cómo instalar el receptor Esta unidad tiene 16 combinaciones de códigos diferentes. Para configurar el código, sigue los siguientes pasos: A. Configurar el código del transmisor: a. Retira la cubierta de la batería. Presiona con firmeza debajo de la flecha y retira la cubierta de la batería deslizándola. b. Desliza los interruptores de código según tu elección hacia arriba o hacia abajo. (Todas las configuraciones de fábrica son hacia arriba). A.
Cuidado del ventilador Solución de problemas Aquí tienes algunas sugerencias para el mantenimiento de tu ventilador. 1. Debido al movimiento natural del ventilador, algunas conexiones pueden aflojarse. Revisa las conexiones de soporte, soportes y accesorios de aspas dos veces al año. Verifica que estén seguros. (No es necesario desmontar el ventilador del techo). 2. Limpia tu ventilador con frecuencia, para que luzca como nuevo a pesar de los años.
TAMAÑO VELOCIDAD VOLTIOS AMPERIOS 52” VATIOS RPM PIES CÚB. X MIN. Baja 120 0.32 15 60 2387 Media 120 0.41 29 98 3911 Alta 120 0.49 56 150 5873 PESO NETO PESO BRUTO PIES CÚB. 23.3 Lb 26.4 Lb 1.93 Estas medidas son aproximadas. No incluyen ni el amperaje ni el vataje consumido por el kit de luces. Distribuido por Your Other Warehouse LLC 12100 Little Cayman Dr.
Garantía limitada de por vida de Hampton Bay Garantía de por vida para el motor NOTA IMPORTANTE: Para asegurar la garantía de servicio, si es necesario, registre su ventilador en: gpwarranty.com Hampton Bay garantiza de por vida, a partir de la fecha de compra por el comprador original, que el motor del ventilador no presenta defectos de fabricación ni de material desde la fecha de salida de Usted debe presentar una copia del la fábrica.