User's Manual

Assembly - Attaching the Blades

Attaching the fan blades

Ƒ Attach a blade (F) to blade bracket (M) using the decorative

nuts (BB) and blade attachment screws (AA) provided. Insert

a blade attachment screw (AA) through a hole in the blade

(F) and the blade bracket (M) and into the decorative nut

(BB). Repeat for the two remaining holes in the blade (F).

Ƒ Tighten each screw (AA) securely.

Ƒ Repeat these steps for the remaining blades.

Attaching the light kit pan

Ƒ Remove one screw (NN) from the black bracket below the fan

motor assembly (E). Loosen but do not remove the other two

screws.

Ƒ Connect the blue wire exiting the bottom of the fan motor

assembly (E) with the black wire from the top of the light kit pan

(G).

Ƒ Connect the white wire exiting the bottom of the fan motor

assembly (E) with the white wire from the top of the light kit pan

(G).

Ƒ Push the light kit pan (G) up to the fan motor assembly (E) so

that the two loosened screw heads t into the keyhole slots.

Turn the light kit pan (G) clockwise.

Ƒ Re-install the screw (NN) that was removed in step 1.

Ƒ Make sure all the screws are rmly tightened.

Assembly - Attaching the Light