User's Manual
Table Of Contents
- NAMES OF CONTROLS
- REMOTE HANDSET
- REMOTE CONTROL OPERATION
- REPLACING THE REMOTE CONTROL BATTERY
- AC OPERATION
- DC OPERATION
- TURNING THE UNIT ON/OFF
- Adaptor with ferrite must be used with this equipment to ensure compliance with the Class B FCC limits.
- SETTING THE FUNCTION MODE
- ADJUSTING THE VOLUME
- EQUALIZER (EQ) FUNCTION
- ID3 (show tag) System
- HEADPHONE JACK
- PARTY LIGHT
- TUNING TO A RADIO STATION
- AUTO PRESET MEMORY / SCAN
- MANUAL PRESET MEMORY
- SUPPORTED DISC FORMATS
- LOADING A DISC
- PLAYING A DISC
- To skip tracks
- To scan quickly to a point in a track
- To skip tracks quickly (for MP3 discs, only）
- To select a desired folder (for MP3 discs, only)
- PROGRAMING TRACKS
- REPEAT/RANDOM/INTRO PLAY MODE (P-MODE)
- PLAYING MP3s FROM USB MEMORY
- CONNECTING A DEVICE FOR THE FIRST TIME (PAIRING)
- PLAYING CONNECTED DEVICES
12
AUX MODE
Play audio from devices connected to the AUX IN jack [8]. Connect a 3.5mm AUX cable to the
AUX IN jack [8] found on the front of the Boombox and it will switch to AUX mode automatically.
To exit AUX mode, disconnect the cable from the AUX IN jack [8].
1. Connect your audio device to the 3.5mm AUX IN jack [8] found on the front of the
unit with a 3.5mm AUX cable.
2. Set the volume level of the connected audio device to approximately 80%. Make
additional adjustments to the volume level by turning the VOLUME dial [20] of the
unit.
3. Control playback with your audio device.
MIC JACK OPERATION
Microphone input is available in all modes. You can speak over playback in any mode, or simply
stop playback to use the microphone by itself.
1. Connect your microphone to the 6.3mm MIC input jack [7] found on the front of the unit.
2. Press the M.VOL + button [9] or the M.VOL - button [10] to increase or decrease
the microphone input level.
GUITAR JACK OPERATION
Guitar input is available in all modes. You can play over music as a backing track, or simply play
while music playback is stopped.
1. Connect your guitar to the 6.3mm Guitar input jack [18] found on the front of the
unit.
2. Press the G.VOL + button [15] or the G.VOL - button [16] to increase or decrease
the Guitar input level.