User's Manual

9
L-1: Blue LED will be on constantly when it is selected.
L-2: Blue LED will be on flashing mode.
L-3: Red LED will be on constantly.
L-4: Red LED will be on flashing mode.
L-5: 7 colors LED will be on flashing mode.
RADIO OPERATION
Listen to FM radio broadcasts. Press the FUNCTION button on the unit, the display reads FM
and the radio frequency.
Note: in order to get the best reception, extend the FM ANT. on the rear of the unit before use to
its full length.
TUNING TO A RADIO STATION
If you know the station frequency that you want to tune to directly:
Tune to a station by press the /TUN.+ or /TUN.- button repeatedly. The station frequency
is shown on the display.
AUTOMATIC TUNING STOP
Press and hold the /TUN.-BUTTON or /TUN.+ BUTTON to start tuning, Tuning stop
automatically when a station is received.
AUTO PRESET MEMORY / SCAN
To scan for stations within reception range and save them to preset memory
automatically, press and hold the /PAIR/AUTO button. After the unit is finished
scanning, the unit will automatically tune to preset number 1 (P01). To tune to a
preset station:
To tune to the next preset station, press the 10/M./FOLD.+ button.
To tune to the previous preset, press the 10/M./FOLD.- button.
MANUAL PRESET MEMORY OPERATION
Choose which stations to save in preset memory instead of scanning automatically.
1. Use the /TUN.+ or /TUN.- button to tune to the station that you want to save
as a preset (e.g., 93.1).
2. Press the P-MODE/M. button. “ ” will flash on the display to indicate that you
are saving the station as Preset Memory 01. (To change the preset memory
number, press the 10/M./FOLD.+ or 10/M./FOLD.-buttons.)
3. Press the P-MODE/M. button to finish saving the station (e.g., P01 is now set to
93.1).
4. To save another station, repeat steps 1 to 3. You may save up to 30 FM stations.
USB OPERATION
This unit provides two USB ports for music playback.
1. Press the FUNCTION button on unit to select “USB” mode.