User's Manual

7
L-2: Red LED will be on constantly.
L-3: Green LED will be on constantly.
L-4: Purple LED will be on constantly.
L-5: Light green LED will be on constantly.
L-6: Light blue LED will be on constantly.
L-7: White LED will be on constantly.
L-8: 7 colors LED flash follow the music rhythm.
L-9: 7 colors auto change smoothly
There is LED lighting around the volume knobs. Press and hold the LIGHT button to
turn on the light. To inactivate the light, press and hold the LIGHT button again.
RADIO OPERATION
Listen to FM radio broadcasts. Press the FUNCTION button on the unit, the display reads FM
and the radio frequency.
Note: in order to get the best reception, extend the FM ANT. on the rear of the unit before use to
its full length.
TUNING TO A RADIO STATION
If you know the station frequency that you want to tune to directly:
Tune to a station by press the /TUN.+ or /TUN.- button repeatedly. The station
frequency is shown on the display.
AUTOMATIC TUNING STOP
Press and hold the /TUN.-BUTTON or /TUN.+ BUTTON to start tuning, Tuning stop
automatically when a station is received.
AUTO PRESET MEMORY / SCAN
To scan for stations within reception range and save them to preset memory
automatically, press and hold the /PAIR/SCAN button. After the unit is
finished scanning, the unit will automatically tune to preset number 1 (P01). To
tune to a preset station:
To tune to the next preset station, press the 10/MEM./FOLD.+ button.
To tune to the previous preset, press the 10/MEM./FOLD.- button.
MANUAL PRESET MEMORY OPERATION
Choose which stations to save in preset memory instead of scanning automatically.
1. Use the /TUN.+ or /TUN.- button to tune to the station that you want to
save as a preset (e.g., 93.1).
2. Press the P-MODE/M. button. “ ” will flash on the display to indicate that you
are saving the station as Preset Memory 01. (To change the preset memory
number, press the 10/MEM./FOLD.+ or 10/MEM./FOLD.- buttons.)