Installation Instructions

5
6. To search for a particular passage during playback, press and hold the or button to
scan the current playing track at high speed until desired point (passage) appears, then
release the button for normal playback mode.
7. To select a song which track number exceeds 10, press the 10/MEM./FOLDER + or
10/MEM./FOLDER - button each time to skip forward/backward 10 tracks, then press the
or button to select desired track.
8. To select a desired folder (if the USB contains more than one folder), press and hold the
10/MEM./FOLDER + or 10/MEM./FOLDER - button each time to skip forward/backward a
folder, then press the or button to select desired track.
Important: The USB port is intended for data transfer only, other devices cannot be used
with this USB connection. The use of USB extension cords is not recommended. Don’t
plug the USB from the unit when playing or reading the USB device.
REPEAT PLAY
You can play one track or all tracks on the USB repeatedly.
To Repeat a Single Track
1. Press P-MODE/M. button on unit during play, the display will show “ ” and the current track
will be played over and over again.
2. To cancel repeat play, press P-MODE/M. button on unit until “ ” disappears from the
display.
To repeat all the Tracks
1. Press P-MODE/M. button on unit until the “ ALL ” shows steadily on the display, all tracks
on the USB will be played over and over again.
2. To cancel repeat play, press the P-MODE/M. button on unit until “ ALL ” disappears from
the display.
To repeat the folder (only for USB which contains more than one folder)
1. Press the P-MODE/M. button on unit until “ DIR ” shows steadily on the display, the
current folder will be repeated over and over again.
2. To cancel repeat play, press the P-MODE/M. button on unit until “ DIR ” disappears from
the display.
RANDOM PLAY
Press the P-MODE/M. button on unit in play mode till the “RAN” shows steadily on the display,
the random play will start from next track automatically. Press the P-MODE/M. button on unit
again until the “RAN” disappears from the display to cancel.
BLUETOOTH OPERATION
1. Press the FUNCTION button on unit to switch to BLUETOOTH function, the LCD will display
“ ” and the pair indicator will flash at high speed.
2. Turn on the Bluetooth function on the device, scan the unit “TY-ASC75” and connect, then
input the password 0000 if required, the pair indicator keep light up to indicate connection
done, and the display will show “ ”. Press Play to start playback.
3. Rotate the VOLUME knob on the unit or adjust the volume on the external device to
increase or decrease the music volume to your desired level.
4. Press the PAIR/TWS button to disconnect Bluetooth.
Note: The Bluetooth works best within 10 meters in open air.