Installation Instructions

6
TWS OPERATION
If you have two units of this model, you can connect the two units by TWS function to become
stereo output.
1. Connect the device to one of the units by Bluetooth function, this unit will become the master
unit.
2. Turn on the second unit and switch to Bluetooth mode
3. Press and hold the “PAIR/TWS” on the first (master) unit, then these two units will connect
automatically with a sound indicated that the connection is done. The master unit will show
“TWS R” and the second unit will show “TWS L”, then these two units will become stereo
output.
4. Control of play, pause, next track and previous track can be done by both units. Rotate the
volume knob on each unit to adjust the volume individually.
5. To quit the TWS between the two units, press the PAIR/TWS button on the second unit to
disconnect the TWS.
6. To quit the Bluetooth from the mobile, press the PAIR/TWS button on the first (master) unit.
AUX-IN OPERATION
1. Press the FUNCTION button on unit to select the “AUX” mode.
2. Connect your audio device to the AUX IN jack on the top panel of the unit with an AUX IN
cable.(audio cable is not included)
3. Rotate the VOLUME knob on the unit or adjust the volume on the external device to increase
or decrease the music volume to your desired level.
4. Control the playback with your audio device.
MIC JACK OPERATION
Microphone input is available in all modes.
1. Connect your microphone to the 6.3mm MIC JACK found on the top panel of the unit.
2. Press the MIC VOL.+/- button on the unit to increase or decrease the microphone volume.
3. Press the ECHO Button to turn on or off the echo effect of the microphone.