Installation Instructions

4
RADIO OPERATION
Listen to FM radio broadcasts. Press the FUNCTION button on the unit, the display reads FM
and the radio frequency.
Note: in order to get the best reception, extend the FM antenna on the rear of the unit before
use to its full length.
TUNING TO A RADIO STATION
If you know the station frequency that you want to tune to directly:
Tune to a station by press the /TUN.+ or /TUN.- button repeatedly. The station
frequency is shown on the display.
AUTOMATIC TUNING STOP
Press and hold the /TUN.-BUTTON or /TUN.+BUTTON to start tuning, tuning stop
automatically when a station is received.
AUTO PRESET MEMORY / SCAN
To scan for stations within reception range and save them to preset memory
automatically, press and hold the PLAY/PAUSE/SCAN button. After the unit is
finished scanning, the unit will automatically tune to preset number 1 (P01). To
tune to a preset station:
To tune to the next preset station, press the 10/MEM./FOLDER + button.
To tune to the previous preset, press the 10/MEM./FOLDER - button.
MANUAL PRESET MEMORY OPERATION
Choose which stations to save in preset memory instead of scanning automatically.
1. Use the /TUN.+ or /TUN.- button to tune to the station that you want to
save as a preset (e.g., 93.1).
2. Press the P-MODE/M. button. “ ” will flash on the display to indicate that you
are saving the station as Preset Memory 01. (To change the preset memory
number, press the 10/MEM./FOLDER + or 10/MEM./FOLDER - buttons.)
3. Press the P-MODE/M. button to finish saving the station (e.g., P01 is now set to
93.1).
4. To save another station, repeat steps 1 to 3. You may save up to 30 FM stations.
USB OPERATION
1. Press the FUNCTION button on unit to select “USB” mode.
2. Plug the USB memory stick to the USB port on top of the unit. Playback will start
automatically from Track 1.
3. To pause playback, press the PLAY/PAUSE/SCAN button on unit. The playing time will flash
on the display.
4. To resume playback, press the PLAY/PAUSE/SCAN button again.
5. To select a desired track, press the or button respectively during playing until the
desired track appears on the display. The unit will start play automatically.